Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Cole Parmer VP-200 Series
Summary of Contents for Cole Parmer VP-200 Series
- Page 1 VP-200 SERIES VACUUM/PRESSURE PUMP INSTRUCTION MANUAL...
- Page 2 SAVE THESE INSTRUCTIONS To reduce the risks of fire or explosion, electrical shock, and the injury to persons, read and understand all instructions included in this manual.
- Page 3 SWITCH (ON/OFF) PRESSURE (OUTLET) MOTOR VACUUM (INLET) VP-200 Series Vacuum/Pressure Pump (07532-40 & 07532-45)
-
Page 4: Table Of Contents
Contents SAFETY PRECAUTIONS DESCRIPTION GROUNDING INSTRUCTIONS FOR 07532-40 GROUNDING INSTRUCTIONS FOR 07532-45 EXTENSION CORDS OPERATION STORAGE SPECIFICATIONS MAINTENANCE PUMP HEAD REPLACEMENT PARTS LIST SPECIAL APPLICATIONS WARRANTY VALOX is a Registered Trademark of the General Electric Company Trademarks bearing the ® symbol in this publication are registered in the US and in other countries. -
Page 5: Safety Precautions
SAFETY PRECAUTIONS DANGER: IMPROPER USE OF GROUNDING PLUG CAN RESULT IN A RISK OF ELECTRIC SHOCK. DANGER: UNPLUG THE POWER CORD BEFORE ANY CLEANING OPERATION IS STARTED. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK - USE INDOORS ONLY. WARNING: PRESSURIZED GAS SHOULD NOT BE USED FOR THE SUPPLY AS A HAZARDOUS BURSTING CONDITION COULD DEVELOP IN THE PUMP HEAD. -
Page 6: Description
DESCRIPTION The diaphragm-operated VP-200 Pump is designed for pressure, suction and gas circulating applications. The convoluted diaphragm and the unique pump cavity are designed to provide pressure and vacuum characteristics. The media being pumped will come in contact with VALOX ®... - Page 7 OPERATING INSTRUCTIONS Model 07532-40 is supplied complete with a three-prong grounded plug. Model 07532-45 is supplied with a two-prong grounded European-type plug. For staring pump, be sure that the power switch is in the OFF position. Plug in the device and turn the switch to the ON position.
- Page 8 0 in. Hg = Atmosphere 1200 1000 OUTLET PRESSURE (PSG) Vacuum (in. Hg) 0 in. Hg = Atmosphere 1200 1000 INLET VACCUM (in. Hg) Pressure (PSIG) Figure 1...
-
Page 9: Grounding Instructions For 07532-40
GROUNDING INSTRUCTIONS FOR 07532-40 This product must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This product is equipped with a cord having a grounding wire with an appropriate grounding plug and must be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances. -
Page 10: Grounding Instructions For 07532-45
This product is for use on a nominal 120 volt circuit and has a grounding plug that looks like the plug illustrated in Figure 2(A). A temporary adapter, which looks like the adapter illustrated in Figure 2(B) and (C) may be used to connect this plug to a 2-pole receptacle if a properly grounded outlet is not available. -
Page 11: Extension Cords
EXTENSION CORDS Use only a 3-wire extension cord that has a 3-blade grounding plug and a 3-slot receptacle that will accept the plug on the product. Make sure your extension cord is in not damaged. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. -
Page 12: Storage
if desired. Usually, a three foot length of tubing at both ends is more than adequate for quiet operation. If the air or gas collect at the valve seats. This may interfere with the proper can be achieved by a simple valve or pinching of the tube at the inlet (preferred for the diaphragm life) or outlet systems. -
Page 13: Specifications
SPECIFICATIONS *Intermittent or Continuous Duty **Polyethylene fittings not included in height dimensions ***Intermittent Duty: Limit output to 18 psig - Continuous Duty: Limit output to 16 psgi... -
Page 14: Maintenance
PUMP HEAD MOTOR DIAPHRAGM PUMP HOUSING ECCENTRIC ASSEMBLY COVER BOTTOM Figure 3 - Pump Main Components Diagram MAINTENANCE DANGER: UNPLUG POWER CORD BEFORE ANY CLEANING OPERATION IS STARTED. For diaphragm replacement: diaphragm is replaced. This ensures new, clean valves and Proper assembly (factory-adjusted) is critical for proper pump performance. -
Page 15: Pump Head Replacement Parts List
PUMP HEAD REPLACEMENT PARTS LIST Item Part No. Service Kit 07531-99 (FKM diaphragm, two retainers, two valves and plastic head) Service Kit replacement 07531-98 (FKM diaphragm) Service Kit Eccentric Assembly 07530-75 (Eccentric and bearing) Service Kit Housing 07530-78 Service Kit Diaphragm Shaft 07530-79 Service Kit Cover Bottom 07530-83... -
Page 16: Warranty
WARRANTY This product is warranted against defects in material or workmanship, and at the option of the manufacturer or distributor, any defective product will be repaired or replaced at no charge, or the purchase price will be refunded to the purchaser, provided that: (a) the warranty claim is made in writing within the period of time or receipted invoice is submitted concurrently with the claim and shows that the product is within the applicable warranty period, and... - Page 17 PRODUCT RETURN To limit charges and delays, contact the seller or Manufacturer product, either within or outside of the warranty period. When returning the product, please state the reason for the return. For your protection, pack the product carefully and insure it against possible damage or loss.
- Page 18 NOTE:...
- Page 19 NOTE:...
- Page 20 India T: +44 (0) 1480 272279 T: +9122 61394444 E: uk.sales@antylia.com E: info@coleparmer.in W: coleparmer.co.uk W: coleparmer.in Germany China T: +49 (0) 9377 92030 T: +1 847 549 7600 E: de.sales@antylia.com E: sales@antylia.com W: coleparmer.de W: coleparmer.com France T: +33 (0) 1486 37800 T: +1 847 549 7600 E: fr.sales@antylia.com E: sales@antylia.com...
Need help?
Do you have a question about the VP-200 Series and is the answer not in the manual?
Questions and answers