Table of Contents
Advertisement
Quick Links
Technical Assistance
If you have any questions about the use of this product, contact the Manufacturer or
authorized seller.
Cole-Parmer Instrument Company
625 East Bunker Court
Vernon Hills, Illinois 60061-1844
1-800-MASTERFLEX (627-8373) (U.S. and Canada only)
11 (847) 549-7600 (Outside U.S.)
(847) 549-7600 (Local)
FAX (847) 247-2929 (U.S. and Canada only)
11 (847) 549-1700 (Fax outside U.S.)
www.masterflex.com
e-mail: techinfo@coleparmer.com
ISO 9001 SUPPLIER CERTIFIED
Manufactured by:
Barnant Company
28W092 Commercial Ave.
Barrington, Illinois U.S.A. 60010-2392
1-800-637-3739 (U.S. and Canada only)
11 (847) 381-7050 (Outside U.S.)
(847) 381-7050 (Local)
11 (847) 381-7053 (Fax outside U.S.)
(847) 381-7053 (Local fax)
www.barnant.com
e-mail: barnant@barnant.com
ISO 9001 REGISTERED
OPERATING INSTRUCTIONS
L/S
¨
Multichannel
Pump Head
Model Nos.
07534-04
07534-08
A-1299-1008
Edition 02
Printed in the U.S.A.
8/01/02
Advertisement
Table of Contents
Related Manuals for Cole Parmer Barnant Masterflex 07534-04
Summary of Contents for Cole Parmer Barnant Masterflex 07534-04
- Page 1 OPERATING INSTRUCTIONS Technical Assistance If you have any questions about the use of this product, contact the Manufacturer or authorized seller. Cole-Parmer Instrument Company 625 East Bunker Court Vernon Hills, Illinois 60061-1844 ¨ Multichannel 1-800-MASTERFLEX (627-8373) (U.S. and Canada only) Pump Head 11 (847) 549-7600 (Outside U.S.)
-
Page 2: Table Of Contents
Santoprene—Reg TM Monsanto Chemical Co Viton—Reg TM DuPont Dow Elastomers LLC Trademarks bearing the ® symbol in this publication are registered in the U.S. and in other countries. Cole-Parmer Instrument Company Barnant Company 625 East Bunker Court 28W092 Commercial Ave. -
Page 3: Safety Precautions
1. Safety Precautions 2. Introduction The instructions in this manual are task-oriented for easy reference. You can go directly WARNING: Tubing breakage may result in fluid being sprayed from pump. to a particular section and quickly find the answers. Appendix A (See page 12) lists Use appropriate measures to protect operator and equipment. -
Page 4: Installation
3. Installation Stacking Multiple Pump Heads L/S Multichannel pump heads can be stacked(up to eight, 4-channel or four, 8-chan- Tool required: long hex key (provided) nel pump heads) to provide 32 pumping channels from a single drive, depending on Mount the pump head to a Masterflex® L/S® pump drive as follows: the torque capabilities of the drive (Appendix A). -
Page 5: Setup
4. Setup Multichannel pump heads accommodate a broad range of tubing sizes as noted in Tables 1 and 2 (See page 9). Select Tubing Depending on which pump head is used, up to four or eight tubing sets can be teamed up in a single pump head. -
Page 6: Operation
Bi-directional Pumping Fluids can be pumped into and back out of containers by reversing the drive. Partial Bank Pumping The pump can be operated with either a partial or full bank of tubing sets. 5. Operation This section describes the procedures for obtaining the desired performance. Select Tubing and Pump Heads Use Tables 1 and 2 (See below) to select the tubing to provide the required single channel flow rate. -
Page 7: Select Pump Speed
8. Warranty Select Pump Speed Select fixed speed drive or adjust speed of variable-speed drive to provide desired Use only Masterflex microbore tubing sets with Masterflex pumps to ensure nominal flow rate within the rpm speed range shown for the pump model selected. optimum performance. -
Page 8: Appendix A Masterflex® L/S® Pump Drive Types
10. Appendix A Masterflex® L/S® Pump Drive Types 11. Appendix B Masterflex® Microbore Two-Stop Tube Sets Tubing Loading Capacity Tubing ID Platinum-cured Santoprene ® Viton ® (mm) silicone Maximum No. of Channels* 0.19 — — 06416-10 — Tubing Material 0.25 —...
Need help?
Do you have a question about the Barnant Masterflex 07534-04 and is the answer not in the manual?
Questions and answers