Frost; Assembling - Profi-pumpe Solar Aqua-Vital 9-UV-C Operating Instructions Manual

4 English
Solar Panel
Position the solar panel so that it receives direct sunlight. The fountain can not work if the solar pa-
nel is shaded. Adjust the solar panel angle to maximise the amount of solar energy collected.
Connect the pump, panel and the LED-Light on the battery (see illustration). Check whether the flow
is fully open (or else promoted little or no water).

4. FROST

Frost can cause damage to the pump. The pump must be removed and
stored in a frost proof environment if the water is likely to freeze.

5. ASSEMBLING

● Unpack all components carefully
● Unroll the pump and UV light cable.
● Connect the solar panel by plug-in the connect cable.
● Connect the pump and UV light to the control hosing.
● Place the filter box underwater and make sure that, it is fully immersed in water.
● Place the control box on the base.
● The solar pump is now ready to operate.
Filter box
Control box
Base
Summer 0°- 30°
Spring/Autumn 30°- 60°
IMPORTANT!
Slightly twist the
connectors, when
pushing