Operation; Frost - Profi-pumpe OASIS 200-1 Operating Instructions Manual

2.1 IMPORTANT: The performance of the pump depends on the orientation of the solar panels toward the sun and the
intensity of. The max. Data obtained under optimal conditions. A feature in the shade or on cloudy days can not be guaran-
teed. In models with battery operation depends on the function of the battery is charged.
2.2 It's recommended NOT to conduct yourself technical modifications. First, it is not certain whether these changes are
technically correct and, secondly, because no guarantee can be granted.
2.3 Transport damages are immediately to be reported to the package distributor and to us in written form. Failure to give
timely notice to the shipping company, and are therefore rejected your claims from the transport company, so we can not
accept these claims as well. In your legal obligation to cooperate to minimize damage, we point out expressly herewith.

3. OPERATION

Read through the instructions and download the latest necessarily given from the website.
1. Unpack all components carefully
2. Mount the solar panel (see illustration). Remove the protective film from the solar panel (if any).
3. Position the solar panel so that it receives direct sunlight. The fountain can not work if the solar panel is shaded.
Adjust the solar panel angle to maximise the amount of solar energy collected.
4. Connect the pump, panel and the LED-Light on the battery (see illustration). Check whether the flow is fully open
(or else promoted little or no water).

4. FROST

Frost can cause damage to the pump. The pump must be removed and stored in a frost proof
environment if the water is likely to freeze.
(Only for models with two solar panels)
English 3
Summer 0°- 30°
Spring/Autumn 30°- 60°
IMPORTANT!
Slightly twist the
connectors, when
pushing