Frost; Operation And Function - Profi-pumpe OASIS 200-3 Li+LED Operating Instructions Manual

Solar pond pumps
Hide thumbs Also See for OASIS 200-3 Li+LED:
Table of Contents

Advertisement

Available languages

Available languages

4 English

4. FROST

Frost can cause damage to the pump. The pump must be removed and
stored in a frost proof environment if the water is likely to freeze.

5. OPERATION AND FUNCTION

5.1. Model: Oasis 200-3 Li&LED, Oasis 500-3 Li&LED
Turn on the pump: short press the ON/OFF position to turn on the pump, the pump will run
certain hours (ref to battery status) and turn to solar mode automatically. The pump will operate
automatically next day in direct sunlight.
Charge the battery: press and hold on 3 seconds to Turn OFF the pump and charge the full so-
lar energy to battery during day time, turn on the pump when you need it (on demand).
Battery status: Green: battery is full charged. Pump will run around 6-8 hours. Orange: battery
is half charged. Pump will run around 2-6 hours. Red: battery needs charges. Pump will run less
than 1 hour. (Note: In order to protect battery, don't manually turn on the pump frequently)
Note: The indicator light is solid when charging battery.
Model: Oasis 200-3 Li&LED
The model can be loaded with a 5V charger.
Model: Oasis 500-3 Li&LED
The model can be loaded with a 9V charger.
The solar set is operating in „solar powered" mode until you turn on the pump by pressing the
„Battery" mode button. In „Battery" mode, the LED light automatically switches on when it is dark.
5.2. Model: Oslo 900, OXYGEN-3
Oslo 900 and Oxygenator only works when the solar panel is optimally aligned with the sun.
Construction of the pump housing
Model: Oasis 200-3 Li&LED
Oasis 500-3 Li&LED
Filter
Cover
Impeller cover Filter
Cover
Impeller cover
Impeller
Impeller
Model: Oslo 900
Cover
Filter
Impeller cover
Impeller

Advertisement

Chapters

Table of Contents
loading

Table of Contents