Advertisement
your nearest Breville service
centre for examination,
electrical or mechanical
adjustment or repair.
• Do not operate the panel
heater if the power cord is
damaged, frayed or split,
wound around any part of
the panel heater, or is in
contact with heated surfaces
of the heater.
• Do not run the power cord
under carpeting or cover
the cord with rugs, runners
or the like. Arrange the
cord away from traffic areas
and where it will not be
accidentally tripped over.
• Do not locate the panel
heater immediately below a
power outlet.
• Do not use this panel heater
with a programmer, timer
or any other device that
switches the panel heater
on automatically since a
fire risk may exist if the
panel heater is covered or
positioned incorrectly.
• This panel heater is not
intended for use in outdoor
areas, or directly in wet or
moist locations.
• Do not insert or allow
foreign objects to pass
4
through the air inlet or outlet
of the panel heater. This may
cause an electric shock, fire or
damage.
• To prevent a possible fire or
heat damage, allow ample
space around the panel heater:
−For floor use: at least 1.0
metre at the front, 1.0 metre
at the top and 0.5metres at
the rear side and both of the
sides.
−For wall mounted use: at
least 1.0 metre at the front,
0.6 metre at the top and 0.25
metres on both of the sides
and from the base of the
panel heater to the floor.
• Do not totally or partially
block the air inlet or outlets
in any manner. Check the
openings from time to time
for accumulated dust. Ensure
long shag carpet does not
obstruct airflow under the
unit.
• Keep combustible materials
such as drapes and other
furnishings at least 1.7 metres
from the front, sides and rear
of the panel heater.
• Do not touch hot metal
surfaces when in operation or
for some time after, as these
surfaces may be hot.
Advertisement
