Advertisement
Features
SAFETY FEATURES
THERMOSECURE™ Protection
Your panel heater is fitted with a safety device
that automatically switches off the panel heater
in the event of overheating. Should this panel
heater stop working, turn the panel heater
off and inspect the air inlet and outlet for
blockages. Wait until the panel heater has fully
cooled allowing the protection system to reset
before attempting to restart. If the panel heater
fails to operate or the safety device switches
the panel heater off again, take the panel heater
to an authorised Breville Service Centre for
examination or repair.
SAFETY TIP-OVER CUT-OUT SWITCH
This panel heater come with a tip-over switch.
If the panel heater is accidentally tipped over,
it will stop operating. Once the panel heater
is placed back into an upright position, it will
return to standby. Press Power/Wi-Fi button
once to commence operation. The panel heater
operates from the last setting except the timer
function. The timer resets to 0 hour setting.
10
Advertisement
