Advertisement
Wi-Fi
Connectivity
IMPORTANT
Remote operation using the Breville Home
Connect app is only recommended for any
Breville heating appliance when someone
is on the premises. For safety reasons, this
device requires re-pairing to the app if power is
disconnected from the appliance.
This Breville Home connected product can be
controlled both through Wi-Fi and Bluetooth.
While Wi-Fi allows for connectivity and control
remotely, Bluetooth allows for control within
range of the product, even without Wi-Fi.
The Breville Smart Heat Control™ Panel Heater
can offer remote operation by using a home Wi-
Fi connection and the Breville Home Connect™
app downloaded to a compatible mobile phone
through the Google Play store or Apple App
store.
To go straight to the appropriate app store, scan
the QR code below.
For instructions on how to use the app, scan the
QR code below, refer to the Quick Start Guide
that can be found in the box or go to tinyurl.com/
HomeConnectQuickStart.
NOTE
The Breville Home Connect™ app is compatible
with mobile phones running Android
later and iOS devices 11 or later.
NOTE
To control the panel heater using the app, the
panel heater must be plugged into an active
power outlet.
CONNECT YOUR PANEL HEATER
Choose from the options available to allow for
easy pairing and use.
Bluetooth connection has also been activated
for this appliance, which will aid in the pairing
process, providing a higher success rate when
pairing.
WARNING
Ensure your Breville heater has sufficient
space around the unit before pairing the heater
through the Breville Home Connect™ App.
Always ensure the air outlet is free and not
blocked before remote controlling the Breville
heater.
NOTE
If the power supply to the appliance is
interrupted, disconnected or the tip-over
switch is activated, Wi-Fi pairing will also be
disconnected, and re-pairing with the Breville
Home Connect™ App is required.
Follow the steps outlined below.
1. Ensure the mobile device is connected to a
home Wi-Fi network.
2. The panel heater must be on standby. Once
on standby, press and hold the Power/Wi-
Fi button on the panel heater for about 3
seconds until the light above the
will flash, The panel heater is now ready to
connect.
3. Log into your Breville Home Connect™ app
account and stay on the "Home" page. To add
the panel heater to the list, touch 'Add Device'
or the symbol found in the top right-hand
corner of the screen. Follow the prompts in
the app.
®
5.0 or
symbol
17
Advertisement
