Advertisement
Setting up Wi-Fi on Telecommuter Equipment
When the Wi-Fi LED on the Access
Point blinks green, connect a Wi-Fi
enabled device (laptop, desktop or
tablet) to the CiscoAirProvision Wi-Fi
Name (SSID) from your list of
available Wi-Fi networks on your
device.
Note: The default Wi-Fi password is:
password (all lower case)
and will only be used for initial setup.
7
© 2021 AT&T Intellectual Property. All rights reserved. AT&T, Globe logo and other marks are trademarks of AT&T Intellectual Property.
Wi-Fi Light will blink Green
Note: Page 14 has a listing of settings you
create on the following pages that you can
write down to refer back to later.
Advertisement
