Advertisement
Step 1 - Attach Power Cord, ethernet cable to Router
1.
Determine suitable location within a few feet of your broadband residential
Internet gateway (modem/router)
2.
Plug in one side of yellow ethernet cable*
3.
Attach power cable and leave Power button off
4.
If LTE is included, refer to step 3
On/Off Power
Button -
Leave
powered off until
ready for service
activation
* Note: Color of provided ethernet cable may vary
3
© 2021 AT&T Intellectual Property. All rights reserved. AT&T, Globe logo and other marks are trademarks of AT&T Intellectual Property.
Power Cable-
Plug in
Ethernet Cable-
Plug one side into
port
Optional LTE
Card (Black)
Advertisement
