Table of Contents
Advertisement
Select the "Settings" submenu and
►
press the Dial button.
The following text is displayed:
Select the "Installation" submenu
►
and press the Dial button.
The following text is displayed:
Turn the Dial button until "LIVING" is
►
selected.
Press the Dial button.
►
An * appears after "LIVING".
The LED on the storey controller in temperature zone 1 is
extinguished. The name "LIVING" has been assigned to
temperature zone 1.
Enter room name in zoning plan.
►
Repeat these steps until a room name is assigned to all temperature
►
zones.
Start-up
INSTALLATION
DE-INSTALLATION
SUMMER TIME
PARAMETERS
LIVING
DINING
KITCHEN
BEDROOM
LIVING
*
DINING
KITCHEN
BEDROOM
39
Advertisement
Table of Contents
