Table of Contents
Advertisement
Configuration and electrical connection
Connecting central operating device
The storey controller HCE 40 can control up to 10 actuators. However,
no more than 3 actuators may be connected in any one temperature
zone.
Use cables in accordance with the table on Page 24.
►
Attach the connector of the central operating device to the connector
►
of the storey controller as shown in the following diagram.
If several storey controllers (max. 3) are to be connected to the
central operating device, they are to be connected to each
other via the bus cable as shown in the diagram on the next
page.
28
Advertisement
Table of Contents
