Advertisement
Available languages
Available languages
Problem
Continuous
pressure release
from the float
valve.
Steam leakage
from lid.
Food is uncooked
18
Possible reasons
The inner pressure
exceeds working
pressure, or the inner
pressure exceeds the
safety pressure.
Residue in the float valve.
The float valve is stuck.
The sealing gasket is not
properly installed.
The sealing gasket is
dirty.
The sealing gasket is
damaged, or the edge
of the cooking pot is
damaged.
Solid/liquid ingredients
ratio is incorrect.
No electricity from the
power supply.
Clean pressure limit valve, float valve and lid
thoroughly. If float valve still has steam coming out,
please return appliance to the nearest Approved
Service Center for inspecting, repairing or adjusting by
authorized person.
a. Press continuously the pressure release button to
remove the pressure inside of the cooking pot. It can
take a few minutes until the pressure is fully released.
b. Let the appliance cool down for at least 2 hours.
c. Clean and dry off the float valve before restarting
the cooking.
a. Press continuously the pressure release button to
remove the pressure inside of the cooking pot. It can
take a few minutes until the pressure is fully released.
b. Let the appliance cool down for at least 2 hours.
c. Clean and dry off the float valve before restarting
the cooking.
Remove the sealing gasket, clean it and reinstall it in
the correct position.
Remove the sealing gasket, clean it and reinstall it in
the correct position.
Send the appliance to an Approved Service Centre for
repair.
Try again by following precisely the quantities of the
recipe.
Check your home electric circuit.
Solutions
Advertisement
