Pairing A Bluetooth® Device - ION TOTAL PA TITAN User Manual

Pairing a Bluetooth® Device
1. Turn on your Bluetooth device.
2. Power on Total PA™ Titan. When the unit is first turned on, it will automatically enter
Bluetooth pairing mode. If necessary, press the Source button to select Bluetooth mode. If
voice prompts are enabled, you will hear "Bluetooth Pairing."
3. Navigate to your Bluetooth device's setup screen, find "TOTAL PA TITAN" and connect. If
voice prompts are enabled, you will hear "Bluetooth Connected."
Note: If your Bluetooth device prompts for a pairing code, enter "0000".
To disconnect the paired Bluetooth device, turn o
device.
Tip: If you would like to disable (or enable) the voice prompts, press and hold the Play / Pause
button for five seconds.
ION Audio Total PA™ Titan User Guide
1 - PRESS
TOTAL PA™ TITAN
2
or disconnect from your Bluetooth
11