Troubleshooting - ION TOTAL PA TITAN User Manual

TROUBLESHOOTING

If the sound is distorted: Try lowering the volume control of your sound source, musical
instrument, or microphone. Also, try to reduce the overall volume of Total PA™ Titan using the
Control Knob.
I hear a hum when cables are connected:
• Disconnect cables from the input jacks to see if it's a faulty cable.
Make sure the signal cables are not placed near power cables.
•
Connect all audio equipment power cables to outlets which share a common ground.
•
If there is a high-pitched whistling noise when using microphones: This is probably
feedback. Point the microphone away from the speaker.
If you can't hear the microphone over the music volume: Turn down the music volume from
your source.
If there is too much bass: Try adjusting the tone or EQ control on your sound source or on
Total PA™ Titan via the ION Sound Control™ App to lower the bass level. This will allow you to
play the music louder before clipping (distortion) occurs.
If you cannot connect your audio device to Total PA™ Titan via Bluetooth:
Have your audio device (e.g., smartphone or tablet) and Total PA™ Titan as close
•
together as possible while trying to connect. Make sure both the audio device and Total
PA™ Titan are unobstructed by walls, furniture, etc.
Double-press the Bluetooth button to disconnect Total PA™ Titan from any other audio
•
device and restart the search process. If this does not work right away, power o Total
PA™ Titan and then power it back on. See
more information.
Reset the Bluetooth connection on your audio device by turning Bluetooth o and back
•
on. You can find this under the Bluetooth menu in the Settings for your phone or other
audio device.
If this does not work, and you have connected to Total PA™ Titan before, find Total PA™
Titan in the list of available or previously connected devices in your audio device's
Bluetooth menu, tap the "gear" or "i" icon located next to it and then select Unpair or
Forget. Turn Total PA™ Titan o and back on and try pairing again once it reappears in
your available devices list.
Note: If Total PA™ Titan has been paired to another audio device recently that is still
within range, you may need to repeat this process with that audio device to fully
disconnect.
ION Audio Total PA™ Titan User Guide
Operation > Pairing a Bluetooth® Device for
16