ION TOTAL PA TITAN User Manual page 8

6. Stereo-Link™ / Repeat Button
Press and hold this button to start stereo-linking to another Total PA™ Titan. See
> Linking Two Speakers
In USB mode, press this button to change the playback mode. See
for more information.
7. Source Button
Press this button to cycle between Bluetooth, Aux, and USB modes. The current mode will
be shown on the Display.
8. Lights Button
Press this button to cycle between the modes, or to turn the lights off. See
Light Modes for more information.
9. USB Charge/Playback Port
You can use this port for charging the USB device, such as a tablet or smartphone. To
charge a device that is streaming music via Bluetooth, pause the music first and then wait
for it to reconnect after the USB cable (not included) is inserted.
You can also connect a USB flash drive here to play music. See
more information.
10. Mic Inputs
Connect a microphone or mic-level source to these inputs using 1/4" / 6.35 mm and XLR
cables.
11. Aux Inputs
Connect a CD player, MP3 player, or other audio source to these inputs using 1/8" / 3.5 mm
and XLR cables.
12. Mix Out
Connect this output to a speaker, mixer, or recorder using an XLR cable.
13. Power LED
This LED will be lit when the unit is powered on.
ION Audio Total PA™ Titan User Guide
for more information.
Operation
Operation > USB Mode
Operation >
Operation > USB Mode for
8