Pairing A Bluetooth® Device - ION TOTAL PA FREEDOM User Manual

Pairing a Bluetooth® Device
1 - PRESS
1. Power on the Total PA™ Freedom by flipping the power switch on.
2. When the unit is first turned on, it will automatically enter Bluetooth pairing mode. If
necessary, press the Source button to select Bluetooth mode. If voice prompts are
enabled, you will hear "Bluetooth Pairing."
3. Navigate to your device's Bluetooth setup screen, find Total PA Freedom, and connect.
Do not connect to iPA178_BLE; this is reserved exclusively for connecting to the ION
Sound Control™ app. When connected, the Bluetooth icon on the display will flash and
you will hear "Bluetooth Connected".
Note: If you experience trouble in connecting, select "Forget this Device" on your
Bluetooth device and try to connect again.
4. To disconnect, turn o Bluetooth from your device's Bluetooth settings.
ION Audio Total PA™ Freedom User Guide
TOTAL PA FREEDOM
TM
2
13