Appendix-1 Door Options - FRIGOGLASS Super-5 Instructions Manual

Door Lock
Rod holder Bracket
Hex ocket s
Door holder rod
head screw
& washer
APPENDIX-1
DOOR OPTIONS
(door lock – door holder)
B efore
Self tapping Screws
In case of door lock op on:
Remove the two rivets and use new rivets to
place them to the opposite side of the door
lower profile as shown in the figures.
A er
In case of door holder op on:
a. Remove the rod holder bracket by unscrewing
self-taping screws and install it on the opposite
side of the door profile.
b. Remove the door holder rod & washer by
opening Hex. socket head screw and install it
on the opposite side of the door profile as
shown in the figures.
c. Please con nue with the STEP-11.
Door Lock
*Use the hand drill with 3.5mm drill bit
and the hex key.