Step 5 Prepare The Driver Diskette - HighPoint SSD7000 Installation Manual

Linux Debian on SSD7000 Installation Guide
Note
Make sure your USB flash partition format is NTFS or FAT32.
b. Boot, in the presence of the motherboard Log screen, there will be NVMe SSD
information：
c. Enter the motherboard's Boot List and select start from UEFI USB flash:
d.
Command "ArrayCreate.efi" to enter the Utility:
e. Command "create RAID0".
Create RAID0 array with all disks and with maximum capacity.
f. Command "exit"；
g. For more command usages, refer to Appendix A.

Step 5 Prepare the Driver Diskette

Extract HighPoint_NVMe_Debian_11.6.0_x86_64_vx.x.x_xx_xx_xx.tar.gz to top(/)
- 4 -