Table of Contents
Advertisement
30
EN
Edit To O r
From Another
V ideo
Recorder
N U M BER "0"
M EN U
PU SH JO G
AV2 SELECT Setting
Press M EN U twice to access the Main Menu screen.
1
Press PU SH JO G %fi to move the highlight bar (pointer) to "MODE SET", then press O K .
2
Press PU SH JO G %fi to move the highlight bar (pointer) to "AV2 SELECT".
3
Press PU SH JO G
4
a– AV2
b– DECODER : To use a decoder connected to the AV2 IN/DECODER connector.
Press M EN U to return to normal screen.
5
● If you have a decoder, be sure to set "AV2 SELECT" back to "DECODER" after editing.
● If you're not using a decoder, leave "AV2 SELECT" set to "AV2".
● The default setting is "AV2"; if the recorder's memory backup has expired due to a power cut or because the AC was
removed from the recorder, "AV2" will be automatically selected when the power is restored to the recorder. If you are using
a decoder, be sure to set "AV2 SELECT" back to "DECODER".
Downloaded from:
https://www.usersmanualguide.com/
2
1
2
3
4
5
6
7
8
9
0
4
TV PRO G.
O K
to move the highlight bar (pointer) to your choice:
: To use this recorder as the recording deck with the player connected to the
AV2 IN/DECODER connector.
You can use your video recorder as the source player or the
recording deck.
MAKE CO N N ECTIO N S
1
Connect the player's 21-pin SCART connector to the
recorder's 21-pin SCART connector as illustrated on
page 31.
When Using Your Video Recorder As The Source
Player . . .
. . . connect its AV1 IN/OUT connector to the recording
deck.
When Using Your Video Recorder As The Recording
Deck . . .
.
. . . connect its AV2 IN/DECODER or AV1 IN/OUT
connector to the source player.
SET RECO RDIN G DECK'S
IN PUT MO DE
2
Set to AUX. With this video recorder, press N U M BER
key "0" and/or TV PRO G. to select depending on the
connector being used — " AU-1" for the AV1 IN/OUT
connector, or " AU-2" for the AV2 IN/DECODER
connector.
● When using the AV2 IN/DECODER connector, make
sure "AV2 SELECT" is set to "AV2" (see below).
ST ART SO URCE PLAYER
Engage its Play mode.
3
ST ART RECO RDIN G DECK
4
Engage its Record mode.
N O TE:
All necessary cables can be obtained from your dealer.
ED ITIN G
MODE SET
AUTO TIMER : OFF
O. S. D.
: ON
B. E. S. T.
: ON
AV2 SELECT
: AV2
[5 ∞ ] = [ ] : AV2/DECODER
[MENU] : EXIT
Advertisement
Table of Contents
