Table of Contents
Advertisement
easier synchronization between the transmission and reception
of signals.
4. Position the remote
sensor
transmission range, which, in usual circumstances,
feet (30 meters) under ideal conditions.
Note
that the effective range is vastly affected by the building
materials and where the main and remote units are positioned. Try
various set-ups for best result.
Though the remote
sensors
placed away from direct sunlight, rain or snow.
BATTERY INSTALLATION: MAIN UNIT
1. Gently lift up the tab on the battery compartment door.
2. Insert four
(4)
UM-3 or "AA"
3. Replace the battery compartment door.
and main unit within effective
range of 100
are weather resistant, they should be
size batteries.
BATTERY AND CHANNEL INSTALLATION:
REMOTE UNIT
The remote thermo-hygro sensor unit uses two (2)
size batteries.
Follow these steps to install / replace batteries:
1. Remove the screws on the battery compartment.
2. Select the channel number on the [CHANNEL] slide switch.
3. Select the temperature display unit on the °C/°F slide switch.
4. Insert the batteries strictly according to the polarities shown
therein.
5. Replace the battery compartment door and secure its screws.
Replace the batteries when the low-battery indicator of the particular
channel lights up on the main unit. (Repeat the steps described in
section "BEFORE YOU BEGIN")
Note that once a channel is assigned to a remote unit, you can only
change it by removing the batteries or resetting the unit.
4
UM-3
or "AA"
Hide quick links:
Advertisement
Table of Contents
