Notes On Operation; Battery Installation: Main Unit; Battery And Channel Installation: Remote Unit - Oregon Scientific BAR898HGA User Manual

NOTES ON OPERATION

For best operation:
1. Insert batteries for the main unit first. Then proceed
with inserting the batteries for the remote unit.
2. Position the remote unit and the main unit within effec
tive transmission range. In usual circumstances, the ef
fective range is up to 328 feet (100 meters).
3. Though the remote unit is weather resistant, it
should be placed away from direct sunlight, rain or
snow.

BATTERY INSTALLATION: MAIN UNIT

1. Gently open the battery compartment door as shown.
2. Insert four (4) pieces of UM-3 or "AA" size batteries in
accordance with the polarities shown.
3. Close the battery compartment door.
P/N: 086L002778-078 REV1
7/47

BATTERY AND CHANNEL INSTALLATION: REMOTE UNIT

The remote thermo-hygro sensor unit uses two (2) UM-3 or
"AA" size batteries.
Follow these steps to install / replace batteries:
1. Remove the screws on the battery compartment.
2. Select the channel number on the CHANNEL slide
switch.
3. Select the temperature display unit on the °C/°F slide
switch.
4. Insert the batteries strictly according to the polarities
shown therein.
5. Replace the battery compartment door and secure its
screws.
Replace the batteries when the low-battery indicator of the
particular channel lights up on the main unit.
NOTE
: Once a channel is assigned to a remote unit, you
can only change it by removing the batteries or resetting
the unit.
6