Table of Contents
Advertisement
en Top cover
16 Top cover
For cleaning, remove the top cover.
16.1 Removing the upper cover
WARNING ‒ Risk of injury!
A scratched upper glass cover may break and frag-
ment.
Do not use a glass scraper or any harsh or abrasive
▶
cleaning products.
Requirement: Before opening the top cover, remove
any spills with a cloth and dry the cover.
17 Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
If the appliance is defective, call Customer Service.
▶
→ "Customer Service", Page 28
17.1 Malfunctions
Fault
Burner goes out
straight after being ig-
nited.
The burner flame is
not uniform.
The burner flame
goes out while the
appliance is in opera-
tion.
The appliance is not
working.
26
Cause and troubleshooting
The control knob was not held down for long enough.
Keep the control knob pressed in for a few seconds after ignition.
1.
Push the control knob in firmly.
2.
Openings on the burner are soiled.
Clean and dry the openings on the burner.
▶
The burner parts are positioned incorrectly.
Position the burner parts precisely and evenly.
1.
Ensure that the locking catches click into place in the recesses.
2.
Openings on the burner are soiled.
Clean and dry the openings on the burner.
▶
Gas cylinder is empty.
Replace the gas cylinder.
▶
The mains plug of the power cord is not plugged in.
Connect the appliance to the power supply.
▶
Take hold of the sides of the cover with both hands
1.
and pull the cover upwards.
Use a glass cleaner for cleaning.
2.
16.2 Installing the top cover
After cleaning, install the top cover following the
▶
same procedure in reverse order.
Note: Only close the top cover once the hotplates have
cooled down.
WARNING ‒ Risk of electric shock!
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
Only use genuine spare parts when repairing the
▶
appliance.
If the power cord of this appliance is damaged, it
▶
must be replaced by the manufacturer, the manufac-
turer's Customer Service or a similarly qualified per-
son in order to prevent any risk.
Advertisement
Table of Contents
