2 SYSTEM CONFIGURATION
2.3 How to Check the Function Version and Software Version
2 - 5
This section describes how to check the function version of the D/A converter module
and the GX Configuration-DA software version.
(1) Checking the function version of the D/A converter module
(a) Checking at "the SERIAL field of the rating plate" located on the side of the
module.
(b) To check the version using the GX Developer
See Section 8.2.5 of this manual.
(2) Checking the software version of GX Configurator-DA
The software version of GX Configuration-DA can be checked in GX Developer's
"Product information" screen.
[Operating procedure]
GX Developer
(In the case of GX Developer Version 7)
[Help]
[Product information]
MELSEC-Q
Function version
Relevant regulation standards
Software version
2 - 5