Step 3: Connect External Devices - Compaq iPAQ User Manual

Step 3: Connect External Devices

Å
Ä
Quick Setup & User's Guide
Connect the monitor, mouse, and keyboard cables. If you use a network,
connect the network cable to the Ethernet RJ-45 Connector. For easy setup,
Compaq has color-coded the cables and rear panel connectors.
WARNING: To reduce the risk of electrical shock, fire, or damage to the equipment, do not plug
telecommunications/telephone connections into the network interface controller (NIC)
connectors.
PS/2 mouse and keyboard connectors are available only on iPAQ Desktop
Personal Computers equipped with the Legacy Module. A USB mouse or
keyboard may be connected to any of the available USB connectors; however,
you may want to reserve the dedicated, full-speed USB connector for USB
devices, such as digital cameras, scanners, or networking devices that demand
the extra speed for enhanced performance.
CAUTION: Do not add additional, optional hardware devices to your Personal Computer until the
operating system is successfully installed. Doing so may cause errors and may prevent the
operating system from installing properly.
Quick Setup
4