Table of Contents
Advertisement
2 INTRODUCTION
The Oxiswim Sanitisation system is a revolution in how a swimming pool owner can run
their swimming pool or spa. The system has been developed as a result of many years of
research using alternatives to chlorine whilst offering the cost savings of being able to use
chlorine if desired. When operating the pool using Perox Sanitisers at the recommended
level, chlorine cannot co-exist in the water - even if added at very low dosage rates. Chlorine
can only become the dominant sanitiser when all Hydrogen Peroxide has been consumed in
the pool water. When operating using Hydrogen Peroxide, it's free of odours and taste and
is soft and gentle on the skin. What's more, no shower is required after swimming. It's been
described by users as "just like a refreshing swim in a natural spring".
The Oxiswim system uses new catalytic technology that removes the need to use ozone.
However, the advanced oxidation process continues to be the cornerstone of the system
when operating on hydrogen peroxide. Using the advanced oxidation process is a chemical
reaction generated by combining Perox (a chlorine-free, hydrogen peroxide-based sanitiser)
and a catalytic material that will remove bacterial threats better than any other oxidation
process.
The Oxiswim system is a kit of components. Attempting to operate the system
NOTE
without correctly installing all parts or with chemicals other than those
recommended in this manual may result in the system not functioning
correctly, and failure of the system may be hazarous or may cause adverse
effects to your swimming pool or bathers.
Do not use chemicals other than those recommended in this manual
Gloves and safety glasses should be worn when handling chemicals.
OXISWIM MANUAL
P a g e
7 | 45
Advertisement
Table of Contents
