Table of Contents
Advertisement
CONDITIONS OF WARRANTY
This warranty only applies where:
1. The products requiring installation have been sold with installation included and
have been installed by a licensed plumber, electrician, or person who has completed
an accredited course in swimming pool care and maintenance or a person with more
than 12 months on the job learning or a person supervised by one of these people, in
accordance with any written installation instructions provided.
2. The products have been installed and operated in accordance with written
instructions supplied by Waterco;
3. The purchaser is able to provide proof of purchase that specifies the date of
purchase;
4. The product has been serviced or maintained regularly.
5. Installed in an area that is free from flooding or excessive outside contact with
water;
6. Any pool and spa equipment has been used in water:
a. With a temperature not exceeding 40°C degrees Celsius;
b. With a pH range maintained between 7.2 – 7.6;
c. That has been chemically balanced in accordance with the Langelier saturation
index within a range of -0.2 to + 0.2 to ensure that it is not corrosive or scale
forming;
d. That is not saltwater (other than mild saline water conditions which are
compatible with swimming pool saltwater chlorination systems) – unless
otherwise stated by Waterco in both the respective product labels and
brochures that it is suitable for seawater applications; and
e. That has been regularly treated with a sanitising system using bromine, chlorine
in one of its compound forms, or generated in-situ, in concentrations (doses)
recommended by the relative state or territory health departments. (In areas
outside of Australia please refer to the local health department
recommendations before use);
7. Electrical equipment has been adequately protected from salt air environments and
from salt water, and all repairs and replacements shall be carried out by Waterco or
its authorised service dealer unless otherwise authorised in writing by Waterco.
If an authorised service dealer is not available within 25 km (15 miles) of the purchaser's
area:
• The purchaser must contact the place of purchase or Waterco for further
instructions and;
• The purchaser is responsible for any freight or infield labour costs.
OXISWIM MANUAL
P a g e
42 | 45
Advertisement
Table of Contents
