Related Manuals for Waterco OXISWIM
Summary of Contents for Waterco OXISWIM
- Page 1 D U A L S A N I T I S A T I O N Quick Reference Guide Version: 1.1.3 November 2022...
- Page 2 Improper installation will void the warranty. If you cannot obtain the information to a particular question from this guide, please contact the place of purchase or your nearest Waterco branch for further details. Notice to Installer This manual contains essential information about the installation, operation, and safe use of this product.
- Page 3 OXISWIM Quick Reference Guide D U A L S A N I T I S A T I O N Chemical start-up procedure Page | 3...
- Page 4 OXISWIM Quick Reference Guide When starting up an Oxiswim Dual sanitation system on a new pool it is important to follow some easy basic steps on water chemistry. Step 1. Always start with balanced pool water. Test and balance the below parameters...
- Page 5 OXISWIM Quick Reference Guide Step 2. Adding the Oxiswim specialised products. Now that we have a balanced pool, we can start adding the Oxiswim specialised products to the pool water in easy-to-follow steps. Specialised product Dosage Rate Expected Result Perox Pro (Hydrogen Peroxide) 1.5 L per 10,000L...
-
Page 6: Installation & Setup
OXISWIM Quick Reference Guide INSTALLATION SET UP Page | 6... - Page 7 • Perox Pro – Hydrogen peroxide designed explicitly for use in a swimming pool • Perox Safe & Clear – Needed to generate chlorine dioxide from Oxiswim Sanitiser • Perox Activate – Used to break down and remove body fats, oils, sun tan lotions, and makeup.
-
Page 8: Maintenance
OXISWIM Quick Reference Guide CHEMICAL INITIAL DOSE MAINTENANCE 1.5 litres per 10,000 litres raises Approx. 0.09 litres (90ml per Hydrogen Peroxide level by 100ppm 10,000 litres per day) PEROX PRO 21 fl oz. per 1000 US gal raises HP level 1/8 fl oz. - Page 9 OXISWIM Quick Reference Guide WATER CHEMISTRY – Fresh Water Experience When operating using hydrogen peroxide as a sanitiser, the following operating parameters are recommended: Test Result Perox Pro (hydrogen peroxide) 100ppm - 300ppm pH level 7.2 - 7.6 Total Alkalinity level...
- Page 10 OXISWIM Quick Reference Guide WATER CHEMISTRY – Chlorine use When operating using chlorine as a sanitiser, the following operating parameters are recommended: Test Result Residual sanitiser chlorine 1.0ppm – 3.0ppm pH level 7.2-7.6 Total Alkalinity level 100ppm – 150ppm Calcium Hardness 180ppm –...
- Page 11 OXISWIM Quick Reference Guide Dosing Pumps - Hydrogen Peroxide Setting Hydrogen Peroxide Pool size Tube Size Summer Run Winter Run % Setting (L/min) Time (hr) Time (hr) 10,000 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 110,000 120,000 pH Control...
- Page 12 OXISWIM Quick Reference Guide Dosing Pumps - Chlorine Setting Chlorine Pool size Tube Size Summer Run Winter Run % Setting (L/min) Time (hr) Time (hr) 10,000 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 110,000 120,000 pH Control Pool size...
-
Page 13: Welcome Screen
OXISWIM Quick Reference Guide PUMP PROGRAMMING PROCEDURE – OXISWIM Please note: The Oxiswim system comes preset to operate on a pool with a water volume of 50,000 litres. If your swimming pool has a different water volume, please refer to the recommended dosage rate charts in this quick reference guide for the appropriate percentages of feed and timer operation times for your specific size pool. - Page 14 OXISWIM Quick Reference Guide 1. Set Time Starting from the main screen press the Up and Down button simultaneously to enter the menus. Scroll Up/Down until you see the Set Date and Time option. Select this option by clicking the tick button.
-
Page 15: Set Timer
OXISWIM Quick Reference Guide 2. Set Timer Starting from the main screen press the Up and Down button simultaneously to enter the menus. Scroll and select the Time Switch option. In the next menu select “Timer Progr.0”. For our uses, we will only be selecting Timer 0 as the main timer on both the ACID and PEROXIDE pumps. - Page 16 OXISWIM Quick Reference Guide PEROXIDE Pump For the Peroxide Pump, the default setting is for a 50,000 litre pool. The peroxide pump is linked to the GPO outlet. The on/off times displayed on the screen will activate the GPO when the switch box is set to Automatic. When the switch box is set to manual the GPO will operate independently of the timer setting on the Peroxide Pump.