Download Print this page

Dell Inspiron 1425 Service Manual: Vga Connector Board; Removing The Vga Connector Board

Service manual.
Hide thumbs

Advertisement

VGA Connector Board

WARNING:
Before working inside your computer, read the safety information
that shipped with your computer. For additional safety best practices information,
see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your
computer. Damage due to servicing that is not authorized by Dell is not covered by
your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on your computer).
CAUTION:
To help prevent damage to the system board, remove the main battery
(see "Removing the Battery" on page 15) before working inside the computer.
Removing the VGA Connector Board
1 Follow the instructions in "Before You Begin" on page 9.
2 Remove the battery (see "Removing the Battery" on page 15).
3 Remove the keyboard (see "Removing the Keyboard" on page 27).
4 Remove the palm-rest assembly (see "Removing the Palm-Rest Assembly"
on page 31).
5 Remove the display assembly (see "Removing the Display Assembly" on
page 53).
6 Remove the hinge cover (see "Removing the Hinge Cover" on page 69).
7 Remove the screw that secures the VGA connector board to the system
board.
8 Disconnect the display cable from the connector on the system board.
9 Lift the VGA connector board off the system board.
16
VGA Connector Board
73

Advertisement

   Also See for Dell Inspiron 1425

   Related Manuals for Dell Inspiron 1425

This manual also for:

Inspiron m411r

Comments to this Manuals

Symbols: 0
Latest comments: