Removing The Palm Rest Assembly - Dell Inspiron N3010 Service Manual

Back to Contents Page
Palm Rest Assembly
Dell™ Inspiron™ N3010 Service Manual
Removing the Palm Rest Assembly
Replacing the Palm Rest Assembly
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
surface (such as a connector on your computer).
CAUTION:
is not covered by your warranty.
CAUTION:
computer.
Removing the Palm Rest Assembly
1. Follow the instructions in
2. Remove the battery (see
3. Remove the memory-module cover (see
4. Remove the memory module(s) (see
5. Disconnect the antenna cables from the connectors on the Mini-card.
6. Remove the seven screws that secure the palm rest assembly to the computer base.
1 antenna cables (2)
7. Remove the keyboard (see
CAUTION:
8. Lift the connector latch and pull the pull-tab to disconnect the touch pad cable and power button board cable from the connectors on the system board.
9. Remove the seven screws that secure the palm rest assembly to the computer base.
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
To help prevent damage to the system board, remove the main battery (see
Before You Begin.
Removing the Battery).
Removing the Memory-Module
Removing the Memory
Removing the Keyboard).
To avoid damage to the connectors, lift the connector latch and then remove the cables.
UserManuals.info
Removing the
Cover).
Module(s)).
Battery) before working inside the