Amino Maxi Linux User Manual page 2

. Inserting batteries
1 Slide the battery 2 Insert 2 x
housing cover AAA batteries
downwards to observing the
remove correct polarity
Battery information
Do not mix different types of battery or old and new batteries.
Do not use rechargeable batteries with the remote control.
3 Refit the battery
housing cover
Remove the batteries from the remote control if you are not going to use it for
several weeks, to avoid the risk of leakage.
Please respect your environment and any local regulations and dispose of old
batteries in a responsible manner.
Do not attempt to recharge the batteries.
Immediately remove any leaking batteries.
Take care when handling leaking batteries as they may cause burns to the skin
or eyes, or other physical injuries.
. Operation
When pressing a button, point the remote towards the front of the STB to
ensure correct operation. Do not cover the infra-red (IR) window at the front
of the remote and at the front of the STB.
When a button on the remote is pressed, either the STB POWER button or, if a
TV brand has been entered, the TV/AUX POWER button will flash, depending
on which product is being controlled by the remote.
If a button is pressed for more than 30 seconds the remote will stop
transmitting commands to preserve battery life.