Amino Maxi Linux User Manual

Maxi Linux Remote Control User Guide
2. Inserting batteries
1 Slide the battery 2 Insert two
housing cover AAA batteries
downwards to observing the
remove correct polarity
1. Remote control layout
1 TV input source select
2 TV/AUX power/standby
3 Colour navigation
4 Replay VOD or recorded video
5 Set-top box (STB) PVR* transport
6 Electronic Program Guide
7 Navigation and OK
8 Back
9 Volume up and down
10 Channel select and text entry
11 Go to Live TV
12 Option (mapped by your service
provider)
13 Infra-red (IR) window
14 STB power/standby
15 VOD menu
16 Forward VOD or recorded video
17 Information
18 Exit
19 Menu (for STB)
20 Channel/Page up and down
21 Mute
22 Subtitles/Closed captions
23 DVR /recordings menu
24 Low battery warning LED
Note: Some functionality may not be available on specific models of STB, also functionality may vary with the TV
service delivered by your service provider.
*Personal video recorder - available on some models of STB
Battery information
Do not mix different types of battery or old and new batteries.
3 Refit the battery
Do not use rechargeable batteries.
housing cover
Do not attempt to recharge the batteries.
Remove the batteries from the remote control if you are not going to use it for
several weeks, to avoid the risk of leakage.
Please respect your environment and any local regulations and dispose of old
batteries in a responsible manner.
Immediately remove any leaking batteries.
Take care when handling leaking batteries as they may cause burns to the skin
or eyes, or other physical injuries.
3. Operation
When you use the remote control, point it towards the front of the set-top
box (STB). Do not cover the infra-red (IR) window at the front of the remote
control and at the front of the STB.
If you press a key for more than 30 seconds the remote control will stop
transmitting commands to preserve battery life.