SINGLE/DOUBLE FAN
SIDE SNOW HOOD INSTALLATION
Side Snow Hood Assembly
1. Install two (2) provided screws into the top side holes (one
on the right; one on the left). DO NOT TIGHTEN (Image 4a)
Insert screws.
** DO NOT TIGHTEN **
(Image 4a)
2. Place SIDE1 on top of the top right screw (hanging
from the screw (Image 4b))
3. Slide SIDE2 on top of the top left screw (hanging from
the screw (Image 4c))
12
(Image 4b)
(Image 4c)