Single/Double Fan Rear Snow Hood Installation - Daikin RZQ18TAVJU Installation Instructions Manual

SINGLE/DOUBLE FAN
REAR SNOW HOOD INSTALLATION
Rear Snow Hood Assembly
1. Remove the plastic grill from the condenser unit (Image 3a).
(Image 3a)
2. Remove the four (4) existing screws from the left side of
the condenser unit and save (Image 3b).
3. Install two (2) screws into the top holes (one on the right;
one on the left).
DO NOT TIGHTEN (Image 3c).
Insert screws.
** DO NOT TIGHTEN **
10
(Image 3b)
(Image 3c)