Advertisement
Quick Links
C
DCN22674
B
DCN-736
O
EDN-734
NO.
EDN/DCN
106-03-003
取 扱 説 明 書
INSTRUCTION MANUAL
6298
0.5mm PITCH FPC CONNECTOR
2023/02/27
R. Nakajima
2011/10/11
Y. Manba
2009/03/25
A. Hagiwara
DATE
PREPARED by
© 2023 KYOCERA Corporation
Series
CHECKED by
No. : 205-03-192
N. Nakajima
Y. Fujii
N. Hayashi
APPROVED by
Advertisement
Related Manuals for Kyocera 6298 Series
Summary of Contents for Kyocera 6298 Series
- Page 1 取 扱 説 明 書 INSTRUCTION MANUAL 6298 Series 0.5mm PITCH FPC CONNECTOR DCN22674 2023/02/27 R. Nakajima N. Nakajima DCN-736 2011/10/11 Y. Manba Y. Fujii EDN-734 2009/03/25 A. Hagiwara N. Hayashi EDN/DCN DATE PREPARED by CHECKED by APPROVED by 106-03-003 © 2023 KYOCERA Corporation...
- Page 2 MOUNTING ON BOARD 3.2 FPC の挿入について INSERTING THE FPC 3.3 FPC の抜去について WITHDRAWING THE FPC 3.4 FPC の屈曲について FLEXUSE OF AN FPC その他の注意事項 OTHER CAUTIONS 製品の保管及び管理 STORAGE AND CONTROL 6298 SERIES INSTRUCTION MANUAL No.205-03-192 © 2023 KYOCERA Corporatio n 106-03-004 PAGE 1/9...
-
Page 3: 各部の名称 Name Of Each Part
本製品 6298 シリーズコネクタは、0.5 mm ピッチワンタッチロックタイプの FPC 用コネクタです。 本コネクタの取り扱いには注意が必要です。ここで 6298 シリーズコネクタの取り扱い上の注意点につい て記載します。 6298 Series is a one-touch locking type 0.5 mm-pitch FPC connector. Caution must be taken to handle this product. Cautions in handling the product are described in this manual. - Page 4 3.2 FPC の挿入方法について Inserting and withdrawing FPC (1) スライダーは解除状態で上方 90°開きます。完全に開いていないと FPC 挿入性に支障がありますので 注意してください。 The actuator opens up to 90 degrees. The actuator shall be opened fully for FPC to be inserted appropriately. 6298 SERIES INSTRUCTION MANUAL No.205-03-192 © 2023 KYOCERA Corporatio n 106-03-004 PAGE 3/9...
- Page 5 The actuator shall be opened up to an angle of 90 degrees at maximum. Do not apply a load of 0.1kgf or more to the actuator further than the fully opened position. No good Contact tail 6298 SERIES INSTRUCTION MANUAL No.205-03-192 © 2023 KYOCERA Corporatio n 106-03-004...
- Page 6 Apply the jig to the actuator. 合わせる。 スライダーを開放する。 Align the center of the jig to Recline the jig with its bottom the center of the actuator. grounded. 6298 SERIES INSTRUCTION MANUAL No.205-03-192 © 2023 KYOCERA Corporatio n 106-03-004 PAGE 5/9...
- Page 7 In order to unlock the both sides (R/L) of the actuator simultaneously, use the jig with paying attention the following. 1) Apply the jig to the entire actuator. 2) Do not twist the jig in order not to put a load to one side. 6298 SERIES INSTRUCTION MANUAL No.205-03-192 © 2023 KYOCERA Corporatio n 106-03-004...
- Page 8 To lock the actuator, make sure that the FPC is not inserted obliquely and press the actuator down with a soft pressure applied on it in the direction of the rotation on the axis. 6298 SERIES INSTRUCTION MANUAL No.205-03-192 © 2023 KYOCERA Corporatio n...
- Page 9 Please contact us when an FPC has to be bent repeatedly near the opening for the FPC insertion. According to conditions, evaluating tests will be conducted by us. 可能な限り長くしてください As long as possible 6298 SERIES INSTRUCTION MANUAL No.205-03-192 © 2023 KYOCERA Corporatio n 106-03-004...
- Page 10 If you have any question in use, please contact the following department. 営業部：横浜市緑区中山町 402-1 技術部：同上 Sales Department: Nakayamacho 402-1, Midori-ku, Yokohama-city, Kanagawa-pref., 226-8512, JAPAN Phone No.: 045-611-1010 Engineering Department: Ditto excepting phone No.: 045-611-1029 6298 SERIES INSTRUCTION MANUAL No.205-03-192 © 2023 KYOCERA Corporatio n 106-03-004 PAGE 9/9...
Need help?
Do you have a question about the 6298 Series and is the answer not in the manual?
Questions and answers