Polaris 650 2023 Owner's Manual page 99

PRO RMK (Velocity)
RMK KHAOS
REAR TRACK SHOCK SETTINGS
For riders who weigh 160-220 lbs. (73-100 kg), test ride at factory settings, then
make fine-tuning adjustments. See the following initial RTS Shock Preload
Settings table.
For riders outside the 160-220 lbs. (73-100 kg) weight range, adjust the
factory-set preload to the following installed lengths as a starting point, then test
ride before making fine-tuning adjustments. Do not exceed the minimum and
maximum installed length requirements. See the following initial RTS Shock
Preload Settings table.
Always perform shock spring preload adjustments with the weight of the vehicle
removed from the shock and with the shock at full extension. If adjustments to
the factory-installed springs are not sufficient for riders over 300 lbs. (136 kg),
optional stiffer springs are available. Your POLARIS dealer can assist.
Do not install accessory bogie wheels on the inside of the rail beams if your
model is equipped with a remote reservoir rear track shock or damage will
occur. The rail scratchers must first be removed as they interfere with the
FACTORY SPRING SETTINGS
Always perform shock spring preload adjustments with the weight of the vehicle
removed from the shock and with the shock at full extension.
MONOTUBE
MODEL
accessory bogie wheels.
CLICKER SETTING
(FROM FULL STIFF)
NOTICE
VELOCITY
THE PERFECT FIT
6
High-Speed: 4
Low-Speed: 6
97