Polaris 650 2023 Owner's Manual page 102

THE PERFECT FIT
HANDLEBAR COMPONENT ALIGNMENT
Always loosen the mounting screws before moving a handlebar component.
Moving a component without first loosening its mounting screws may cut
grooves into the handlebar, making it difficult to secure the component.
Take care to avoid damaging hand warmer/brake switch wires when moving
COMPONENT TORQUE VALUES
Do not over-torque the components listed below. Overtightening can lead to
Handlebar Hook Screw
q
w Handlebar Clamp Screws
e Throttle Block Cover Screws
Throttle Block Set Screw
r
100
component damage.
COMPONENT
CAUTION
components.
IMPORTANT
Aluminum: 10 ft-lbs (13.5 N·m)
Steel: 18 ft-lbs (24 N·m)
35 in-lbs (4 N·m)
6 in-lbs (0.7 N·m)
27 in-lbs (3 N·m)
TORQUE