Cleaning Carpets - Silvercrest SHBR 560 B1 Operating Instructions Manual

Cleaning carpets

NOTE
► Before using the appliance to clean a carpet, test the appliance on an
inconspicuous area of the carpet.
► Before cleaning, check the carpet manufacturer's label for special care
instructions. The appliance is not suitable for sensitive carpets (e.g. silk,
leather, flokati etc.).
Once the appliance is assembled and the fresh water tank
and cleaning solution:
Unwind the power cable
z/p
. To unwind the power cable
pull the upper cable retainer
fig. 16).
Insert the plug into the mains power socket.
Press the carpet switch
The LED on the carpet switch
Fig. 16
Before each use, press the cleaning solution switch
ing solution to the rotary brush
The cleaning solution display
function is activated or the cleaning solution switch
(see fig. 19).
SHBR 560 B1
u
completely from the upper and lower cable retainers
u
quickly from the cable retainers
z
out a little way and turn it downwards (see
e
to switch the appliance on (see fig. 17).
e
lights up blue.
Fig. 17
6
so that it is ready for use (see fig. 18).
w
flashes alternately blue when continuous spray
q
is filled with water
z/p
t
twice briefly to add clean-
t
is being held down
GB │ IE │
,
13 ■