Filling The Fresh Water Tank - Silvercrest SHBR 560 B1 Operating Instructions Manual

Filling the fresh water tank

ATTENTION! PROPERTY DAMAGE!
►
► Never operate the appliance without water in the fresh water tank
► Use only standard commercial, non-foaming floor cleaners as cleaning
agents.
Grasp the fresh water tank
upwards out of the appliance (see fig. 6).
Flip the fresh water tank
Fig. 6
For small areas
or distilled water up to the first fill level marking
For small areas
solution up to the second fill level marking
For large areas
or distilled water up to the third fill level marking
For large areas
solution up to the fourth fill level marking
SHBR 560 B1
Fill the fresh water tank
(up to max. 60°C) or distilled water.
Do not use boiling water.
q
by the gripping grooves on the side and pull it
q
over and unscrew the lid. (see fig. 7).
Fig. 7
(up to 25 m2), fill the fresh water tank
(up to 25 m2), fill the fresh water tank
(up to 55 m2), fill the fresh water tank
(up to 55 m2), fill the fresh water tank
q
only with cold to warm tap water
q
with tap water
(see fig. 8).
q
with cleaning
(see fig. 8).
q
with tap water
(see fig. 9).
q
with cleaning
(see fig. 9).
q
.
GB │ IE │
9 ■