Husqvarna CT 36A Operator's Manual page 23

To lift the product with lifting equipment
WARNING:
equipment has the correct dimension. The
type plate on the product shows the product
weight.
WARNING:
product. Make sure that the lifting bracket is
correctly installed and not damaged.
WARNING:
or near a lifted product.
• Attach the lifting equipment to the lifting point.
WARNING:
hooks, chains or other lifting equipment
with rough edges that can cause
damage to the lifting point.
To lift the product manually
WARNING:
injury. The recommended maximum weight
for each person to lift is 25 kg. Refer to
Technical data on page 25 or read the type
plate on the product for information about
the product weight.
• Make sure that the number of persons that lift is
sufficient to lift the product safely.
• Balance the weight between the persons that lift.
1452 - 003 - 30.01.2023
Make sure that the lifting
Do not lift a damaged
Do not walk or stay below
Do not use metal
Heavy lifts can cause
• Lift the product by the protection ring (A).
A
To attach the product to a transportation
vehicle with tie-down straps
1. Turn the blade pitch knob counterclockwise until the
blades are flat and the blade pitch cable is loose.
2. Lift the product onto the transportation vehicle.
Make sure that the handle does not go out of the
transportation vehicle.
3. Put pieces of wood or equivalent between the
protection ring and the surface of the transportation
vehicle. This prevents damage to the blades.
4. Attach tie-down straps between the protection ring
and the vehicle in a cross pattern.
a) Attach the tie-down straps at the lowest part
of the protection ring to prevent damage to the
gearbox output shaft.
b) Do not tighten the tie-down straps too much.
Storage
• Clean the product before storage.
• Keep the product in a dry and frost-free area.
• Keep the product in a locked area to prevent access
for children or persons that are not approved.
23