Controller Operation - LG MULTI V ARNH423K3A4 Installation Manual

Hydro kit high temperature (k3)

Table of Contents

Hydro Kit Controller Operation

Table 25: Controller Main Screen Display.

Controller Component

Operation Display Window

Back Button

Up / Down / Left / Right Button

OK Button

On / Off Button

Operation Settings

Operation Mode

The desired operation mode can be easily controlled. From the main

screen, press the Left < and Right > buttons to select the operation

to set the operation mode.

Some products may not support some operation modes.

AI / Auto Operation

AI / Auto Operation applies only to heating. To save energy and provide high comfort levels, the set temperature will follow outside tempera-

ture. If the outdoor temperature decreases, heating capacity for the room will increase automatically to maintain the temperature. All param-

eters must be set by the trained service provider during start-up, and must be adapted to the environment of the installation site.

1. Select AI / Auto Mode.

2. Select the desired temperature category.

Figure 72: Select AI / Auto Mode.

Decreasing temperature by 5.4°F (3°C) (based on room air temperature)

-9°F (-5°C), -7.2°F (-4°C), -5.4°F (-3°C), -3.6°F (-2°C), -1.8 (-1°C), 0 (0), 1.8°F (1°C), 3.6°F (2°C), 5.4°F (3°C), 7.2°F (4°C), 9°F (5°C)

<Cold

Function

Displays Operation and Set Status

Returns to the Previous Stage from

the Menu's Set Stage

Changes the Menu's Set Value

Saves the Menu's Set Value

Turns the Hydro Kit ON / OFF

Figure 73: Select the Temperature Category.

Due to our policy of continuous product innovation, some specifications may change without notification.