Ford Everest 2006 Manual page 55

EVEREST_F8K4-10-06H_Edition1 Page57
Friday, August 11 2006 10:36 AM
Replacing the transmitter battery
1. Insert a small screwdriver into the slot
and gently pry open the transmitter.
Slot
2. Press the portion of the battery
indicated by A and remove the battery.
Form No.F8K4-10-06H
3. Install a new battery (CR2025 or
equivalent) into the front portion of the
holder with the positive pole (
facing up. Press on the B portion of the
battery to set the battery.
Back cover
Front
cover
4. Align the front and back covers and
snap the transmitter shut.
qService
If you have a problem with the keyless
A
entry system, consult an expert repairer,
we recommend an Authorised Ford
Repairer.
If your transmitter is lost or stolen, bring
all remaining transmitters to an
Authorised Ford Repairer as soon as
possible for a replacement and to make
the lost or stolen transmitter inoperative.
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's
authority to operate the equipment.
Black plate (57,1)
Knowing Your Ford
Doors and Locks
B
CAUTION
)
Back cover
Front of
holder
3-5