Ford Everest 2006 Manual page 157

EVEREST_F8K4-10-06H_Edition1 Page159
Friday, August 11 2006 10:37 AM
Seek tuning
Pressing the seek tuning button (
will cause the tuner to seek a higher or
lower frequency automatically.
NOTE
If you continue to press and hold the
button, the frequency will continue
changing without stopping.
Preset channel tuning
The 6 preset channels can be used to store
6 AM and 12 FM stations.
1. To set a channel first select AM, FM1,
or FM2. Tune to the desired station.
2. Depress a channel preset button for
about 2 seconds until a beep sound is
heard. The preset channel number and
station frequency will be displayed.
The station is now held in the memory.
3. Repeat this operation for the other
stations and bands you want to store.
To tune one in the memory, select AM,
FM1, or FM2 and then press its
channel preset button. The station
frequency and the channel number will
be displayed.
NOTE
If the power supply is interrupted (fuse
blows or the battery is disconnected),
the preset channels will be cancelled.
Auto memory tuning
This is especially useful when driving in
an area where the local stations are not
known. Additional AM/FM stations can
be stored without disturbing the
previously set channels.
Form No.F8K4-10-06H
Press and hold the auto memory button
( ) for about 2 seconds until a beep
, )
sound is heard; the system will
automatically scan and temporarily store
up to 6 stations with the strongest
frequencies in each selected band in that
area.
After scanning is completed, the station
with the strongest frequency will be tuned
and its frequency displayed.
Press and release the auto memory button
( ) to recall stations from the auto-
stored stations. One stored station will be
selected each time; its frequency and
channel number will be displayed.
NOTE
If no stations can be tuned after
scanning operations, "A" will be
displayed.
Traffic information reception
When traffic information is being
broadcast on AM or FM, pressing the
traffic information button (
you to receive traffic information.
Pressing traffic the information button
( ) again will cancel the reception.
The traffic information button's frequency
has been initially set at AM 1008 kHz and
FM 100.0 MHz.
If you are in an area where traffic
information is broadcast in a different
frequency, press the traffic information
button (
about half a second until a beep is heard
to store the frequency in memory.
Black plate (159,1)
Interior Comfort
Audio System
) will allow
) and hold it for more than
6-31