Ford Everest 2006 Manual page 205

EVEREST_F8K4-10-06H_Edition1 Page207
Friday, August 11 2006 10:37 AM
Connect leads in numerical order and disconnect in reverse order.
Booster battery
1. Make sure the booster battery is 12 V
and that its negative terminal is
grounded.
2. If the booster battery is in another
vehicle, don't allow both vehicles to
touch. Turn off the engine of the
vehicle with the booster battery and all
unnecessary electrical loads in both
vehicles.
3. Connect the jumper leads in the exact
sequence as in the illustration.
Connect one end of a lead to the
l
positive terminal on the discharged
battery (1).
Attach the other end to the positive
l
terminal on the booster battery (2).
Connect one end of the other lead to
l
the negative terminal of the booster
battery (3).
Connect the other end to a solid,
l
stationary, exposed metallic point
(for example, the engine hanger)
away from the discharged battery
(4).
Form No.F8K4-10-06H
Jumper leads
Discharged battery
4. Start the engine of the booster vehicle
5. When finished, carefully disconnect the
Black plate (207,1)
In Case of an Emergency
Emergency Starting
and run it a few minutes. Then start the
engine of the other vehicle.
leads in the reverse order described in
the illustration.
7-15