Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Dynacraft Manuals
  4. Motorized Toy Car
  5. 6V BMW 6 GT Series
  6. Owner's manual

Dynacraft 6V BMW 6 GT Series Owner's Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
OWNER'S MANUAL
6V BMW 6 SERIES GT
,
this manual contains important safety
performance and
.
maintenance information
read the manual before taking your
first ride or allowing your child to ride your new electric
-
.
.
ride
on toy
keep the manual handy for future reference
DO NOT RETURN THIS ITEM TO THE STORE
CONTACT DYNACRAFT CUSTOMER SERVICE FOR ASSISTANCE
dynacraftwheels.com/contact
or 1-800-551-0032 9
– 5
ET
AM
PM
FOR AGES 3–5
MAXIMUM WEIGHT: 55 lb (25 kg)
NOTE: Illustrations in this Manual are for reference purposes only and may not reflect the
exact appearance of the actual product. Specifications are subject to change without notice.

Advertisement

loading

Related Manuals for Dynacraft 6V BMW 6 GT Series

Summary of Contents for Dynacraft 6V BMW 6 GT Series

  • Page 1 DO NOT RETURN THIS ITEM TO THE STORE CONTACT DYNACRAFT CUSTOMER SERVICE FOR ASSISTANCE dynacraftwheels.com/contact or 1-800-551-0032 9 – 5 FOR AGES 3–5...
  • Page 2 TABLE OF CONTENTS A Introduction, Safety and Warnings B Before You Begin Assembly C Parts Diagram D Assembly E How to Use Your Ride-On Toy F Detailed Maintenance and Repair G Troubleshooting Guide H Limited Warranty SPECIFICATIONS SUITABLE AGE CAPACITY Up to 55 lb (25 kg) SPEED 2 5 MPH...
  • Page 3 INTRODUCTION, SAFETY AND WARNINGS ABOUT THIS MANUAL: This Manual was written to help you and your child get the most performance, comfort, enjoyment and safety when riding your new electric ride-on toy. It is important for you to understand your new electric ride-on toy.
  • Page 4 RIDER USE AND REQUIRED PARENTAL SUPERVISION RIDERS MUST NOT EXCEED THE WEIGHT LIMIT OF 55 LB (25 KG) AND MUST BE OVER 3 YEARS OLD. NEVER ALLOW MORE THAN 1 CHILD TO RIDE THE RIDE-ON TOY SIMULTANEOUSLY. The age grade for the electric ride-on toy is for 3 years and older. Just because your child is within the age and weight limitations specified for the electric ride- on toy, does not mean that his/her size is appropriate to fit or maintain control of the electric ride-on toy, or that he/she is capable of safely operating the electric...
  • Page 5 SAFE RIDING PRACTICES AND WARNINGS • Check and obey all local laws or regulations which may be in effect in the locations where the electric ride-on toy may be used. • Always wear appropriate clothing and shoes. • Observe the age and weight limitations on the cover of this manual. •...
  • Page 6 • Do not to allow hands, feet, hair, body parts, clothing, or similar articles to come in contact with wheels or other moving parts. • Before each cycle of operation, you must perform the preoperation checks specified in this manual or by the manufacturer, including: –...
  • Page 7 BEFORE YOU BEGIN ASSEMBLY Remove all packing and items from the display box. Make sure that the power switch is turned “OFF” before assembling the electric ride-on toy. ESTIMATED ASSEMBLY TIME You should allow approximately 25 minutes for assembly, not including initial charging time.
  • Page 8 PARTS DIAGRAM Tools Required Screwdriver (not included) Socket Wrench (included) Seat x1 11 Gearbox & Motor x1 M5x16 Machine Screw x2 12 Driving Wheel x1 Steering Wheel x1 13 Axle Cap x4 M5x35 Machine Screw x1 14 M10 Locknut x4 M5 Locknut x1 15 Ø10 Washer x8 Battery (6V/4AH) x1...
  • Page 9 ASSEMBLY Your new ride-on toy requires adult assembly. Please set aside around 25 minutes for assembly. Please identify all parts before assembly and save all packaging material until assembly is completed to ensure that no parts are discarded. TOOLS REQUIRED: 17 mm Socket Wrench (included) Phillips Screwdriver (not included) WARNING:...
  • Page 10 2. DRIVING WHEEL ASSEMBLY • Remove all parts from the rear axle. • Slide the gear box over one end of the rear axle (the side marked with “R” under the body), and into the bigger hole in the ride-on toy body. NOTE: Push the rear axle out to allow the gear box motor to be inserted into the bigger hole.
  • Page 11 3. STEERING WHEEL ASSEMBLY Steering M5x35 Machine Wheel Screw • Turn the ride-on toy body upright. • Remove the M5x35 machine screw and M5 locknut from the steering wheel with a screwdriver. • Insert the steering wheel onto the end of the steering column, lining up the hole in the steering wheel and the hole in steering column.
  • Page 12 5. REAR VIEW MIRROR ASSEMBLY Rear View Mirrow NOTE: Identify the left and right mirrors for assembly. • Insert the rear view mirror into the hole in the front of the ride-on toy body and push until you hear it click into place. •...
  • Page 13 BATTERY CHARGING IMPORTANT! Before first time use, charge the battery for at least 18 hours. Charge the battery for at least 12 hours after each use of the ride-on toy. Never charge the battery longer than 30 hours. Overcharging or undercharging the battery may shorten battery life and decrease ride-on toy running time.
  • Page 14 • Use only an original charger (AC 120V 60Hz) with an output of DC 6V 0.5A to charge your ride-on toy battery. • NOTE TO ADULTS: Regularly examine the charger for damage to the cord, plug, housing or other parts that may result in the risk of fire, electric shock or injury. •...
  • Page 15 HOW TO USE YOUR RIDE-ON TOY Sound Button Forward /Stop /Reverse Power Switch Foot Pedal POWER SWITCH Turn the ride-on toy on and off. FOOT PEDAL To move the ride-on toy, press the foot pedal down. To stop, take your foot off the foot pedal. FORWARD/STOP/REVERSE To move the ride-on toy forward, shift the lever to “Forward”...
  • Page 16 IMPORTANT Always stop ride-on toy when changing the direction to avoid damage to the gears and motor. • This ride-on toy has an adjustable seat belt; please instruct children on how to fasten the seat belt before using. • Do not let any child touch the wheels or be near them when the ride-on toy is moving.
  • Page 17 DETAILED MAINTENANCE AND REPAIR WARNING: Turn power “OFF” before conducting any maintenance procedures. TOOLS REQUIRED: Flat head Screwdriver 17 mm Socket Wrench (not included) (included) Phillips Screwdriver (not included) HOW TO REPLACE FRONT WHEELS AND REAR LEFT WHEEL Ø10 Washer Ø10 Washer Axle Bushing...
  • Page 18 HOW TO REPLACE THE DRIVING WHEEL AND GEAR BOX 1. Remove the axle cap with a flat head screwdriver. 2. Remove the M10 locknut with a 17 mm socket wrench. 3. Remove the Ø10 washer. 4. Remove the driving wheel, and replace with new wheel. IF YOU DO NOT NEED TO REPLACE THE GEAR BOX, PLEASE PROCEED TO STEP 10.
  • Page 19 HOW TO REPLACE THE POWER SWITCH Power Switch Mark Orange Wire Flat Head Screwdriver Red Wire Black Wire 1. Remove the power switch with a flat head screwdriver. 2. Unplug the main connectors from the wire terminals as shown in the photo. 3.
  • Page 20 HOW TO REPLACE THE FOOT PEDAL 1. Use a flat head screwdriver to gently pry up the left side of the foot pedal (see figure 1). 2. Remove the old foot pedal and disconnect it from the pedal switch socket (see figure 2). 3.
  • Page 21 BATTERY CARE AND DISPOSAL Do not store the battery in temperatures above 75° F (23.5° C) or below 32° F (0°C). THIS PRODUCT CONTAINS SEALED LEAD ACID BATTERIES WHICH MUST BE RECYCLED IN ACCORDANCE TO YOUR LOCAL AND STATE LAWS PLEASE CAREFULLY READ AND UNDERSTAND THE FOLLOWING DISPOSAL INSTRUCTIONS: DISPOSAL: This product contains sealed lead acid batteries which must be...
  • Page 22 MAINTAINING YOUR RIDE-ON TOY Occasionally use a lightweight oil to lubricate moving parts such as wheels and the steering linkages. Park the ride-on toy indoors or cover it with a tarp to protect it from wet weather. Keep the ride-on toy away from sources of heat, such as stoves and heaters. Plastic parts may melt.
  • Page 23 TROUBLESHOOTING GUIDE Problem Possible Cause Solution Ride-on toy Undercharged Charge the battery. A new battery should have does not run battery been charged for at least 18 hours before using the ride-on toy for the first time. After first-time use, recharge the battery for at least 12 hours after each use.
  • Page 24 Problem Possible Cause Solution Ride-on toy Loose wires or Check all wires and connectors. Make sure the was running connectors battery connector is tightly plugged into the power but suddenly connector, and that there are no loose wires around stopped the motor.
  • Page 25 Problem Possible Cause Solution Ride-on toy Undercharged Charge the battery. A new battery should have runs sluggishly battery been charged for at least 18 hours before using the ride-on toy for the first time. After first-time use, recharge the battery for at least 12 hours after each use.
  • Page 26 Problem Possible Cause Solution Charger gets It is normal for No action required. warm during some chargers to If your charger does not get warm during use, it get warm during does not mean that it is not working properly. use and is not reason for concern Some chargers...
  • Page 28 UPGRADE YOUR WARRANTY WITH PRODUCT REGISTRATION Free warranty upgrade with online registration at dynacraftwheels.com/register. We respect your privacy. Any information collected by Dynacraft Wheels will never be shared with any other company or organization. See Dynacraft's privacy policy for further information: dynacraftwheels.com/dynacraft-privacy-policy.
  • Page 29 This Warranty is not transferable to anyone else and is the only warranty for your Dynacraft product, to the extent permitted by law No other express or implied warranty is given, and except to the extent prohibited by applicable law, any implied...
  • Page 30 DO NOT RETURN THIS ITEM TO THE STORE CONTACT DYNACRAFT CUSTOMER SERVICE FOR ASSISTANCE dynacraftwheels.com/contact or 1-800-551-0032 9 – 5 Please have the following information available: Model Number Example: 8000-00 Production Date Example: MM.DD.YYYY Serial Number Example: DXXXX00000000 This information can be found on a white sticker in the battery compartment or under your unit, and is required to help us handle your request effectively.