Table of Contents
Advertisement
OWNER'S MANUAL
24V UTV
this manual contains important safety
maintenance information
first ride or allowing your child to ride your new electric
-
.
ride
on toy
FOR AGES 3+
MAXIMUM WEIGHT: TOTAL 130 lb (59 kg) , 65 LB (29.5kg) per
seat
NOTE: Illustrations in this manual are for reference purposes only and may not reflect the exact
appearance of the actual product. Specifications are subject to change without notice.
.
keep the manual handy for future reference
DO NOT
QUESTIONS OR COMMENTS?
1-800-288-1560
,
read the manual before taking your
return this item to the store.
performance and
.
Advertisement
Table of Contents
Related Manuals for Dynacraft 24V UTV
Summary of Contents for Dynacraft 24V UTV
- Page 1 OWNER’S MANUAL 24V UTV this manual contains important safety performance and maintenance information read the manual before taking your first ride or allowing your child to ride your new electric ride on toy keep the manual handy for future reference DO NOT return this item to the store.
- Page 2 TABLE OF CONTENTS INTRODUCTION, SAFETY AND WARNINGS ABOUT THIS MANUAL: This manual was written to help you and your child get A Introduction, Safety and Warnings the most performance, comfort, enjoyment and safety when riding your new electric ride-on toy. It is important for you to understand your new electric ride-on B Before You Begin Assembly toy.
- Page 3 SAFE RIDING PRACTICES AND WARNINGS WARNING: This ride-on toy in not an off-road vehicle and is intended to be • Check and obey all local laws or regulations which may be in effect in the ridden on smooth, level ground. Do not ride in loose dirt, sand, or gravel, which could damages moving parts, the motor, or the electrical system.
- Page 4 BEFORE YOU BEGIN ASSEMBLY • This ride-on toy has no brake; to stop take foot off foot pedal. Do no park or ride on any slopes or steep inclines. • Do not allow hands, feet, hair, body parts, clothing, or similar articles to come in contact with wheels or other moving parts.
-
Page 5: Parts Diagram
ASSEMBLY PARTS DIAGRAM Your new vehicle requires adult assembly. Because your new vehicle is heavy and large, we strongly suggest using two people to finish assembly. Set aside around 30 minutes for assembly. Identify all parts before assembly and save all packaging material until assembly is completed to ensure that no parts are discarded. - Page 6 2. FRONT WHEEL ASSEMBLY • Find a rear wheel marked with an “R” Rear Wheel Axle Cap and labeled with an “Rear”. Find the “R” • Turn the vehicle body upside down (this Ø12 Split Pin Washer marking at the rear end of the vehicle body should be handled carefully by two adults) to match this wheel and slide the wheel •...
- Page 7 6. ROOF ASSEMBLY 4. STEERING WHEEL ASSEMBLY U Shape Steering 4x16 Flat Head Support Screw Wheel • Find the roof and two U shape supports • Gently turn the vehicle body upright. • Remove the M5x35 machine screw and as shown. Screwdriver M5 Nut nut from the steering wheel.
- Page 8 8. ROOF REAR SUPPORTS 10. TOP LED LAMP BATTERIES “R” Mark “L” Mark Roof Rear ASSEMBLY INSTALLATION DC 1.5V (SIZE AA) DC 1.5V (SIZE AA) supports DC 1.5V (SIZE AA) DC 1.5V (SIZE AA) 4x12 • Find the Rear Support marked with an NOTE: Batteries are not included.
- Page 9 11. TOP LED LAMP Top LED Lamp INSTALLATION Convex Point Marks under End Caps • Find the On/Off switch on the back of the LED lamp and align it with the hole in the Cover Cap front of the roof and place the LED lamp on the front of the roof, as shown at right.
- Page 10 BATTERY CHARGING Charging Input IMPORTANT! Before first time use, charge the battery for at least 18 hours. Socket Charge the battery for at least 12 hours after each use of the vehicle. Never charge the battery longer than 30 hours. Overcharging or undercharging the battery may shorten battery life and decrease vehicle running time.
- Page 11 NOTE: • This product has CHARGING PROTECTION: when charging, all the functions will be cut off. • Initial charge - At least 18 hours, and never charge the battery longer than 30 hours. • When the vehicle begins to run slowly, recharge the battery. •...
-
Page 12: Safety Precautions
IMPORTANT • Always stop vehicle when changing the direction to avoid damage to the gears and motor. • This vehicle has an adjustable seat belt; instruct children on how to fasten the Audio Input Cable seat belt before using. (Included) •... - Page 13 DETAILED MAINTENANCE AND REPAIR HOW TO REPLACE REAR WHEEL AND GEAR BOX 1. Remove the axle cap by sliding a flat head screwdriver along the edge of the cap and carefully prying the cap open. 2. Use needle nose pliers to remove the split pin in the hole of the rear axle end. Disconnect power supply before conducting any maintenance procedures.
- Page 14 HOW TO REPLACE THE FOOT PEDAL HOW TO REPLACE FORWARD-REVERSE SHIFT LEVER 1. Unscrew the two screws on the seat and remove the seat. 1. Use a flat head screwdriver to gently pry the LEFT side of foot pedal. 2. Unscrew 4 pieces of 4x12 round head screws as shown to remove the Forward- 2.
- Page 15 MAINTAINING YOUR VEHICLE BATTERY CARE AND DISPOSAL Occasionally use a lightweight oil to lubricate moving parts, such as wheels and Do not store the battery in temperatures above 75° F (23.5° C) or below 32° F (0°C). the steering linkages. THIS PRODUCT CONTAINS SEALED LEAD ACID Park the vehicle indoors or cover it with a tarp to protect it from wet weather.
- Page 16 Replace only with an original 24 Volt (7 Amp/Hr.) battery. Do not use non-original Motor damage Visit the Dynacraft website and replace with a new substitute parts. motor. www.dynacraftwheels.com Motor damage Visit the Dynacraft website and replace with a new Tripped thermal fuse The thermal fuse may “trip”...
- Page 17 Dynacraft shall not have any responsibility run, but other for any resulting break down of the ride-on toy or its components, or for any rider injuries...
- Page 18 Dynacraft Customer Service 1-800-288-1560 7AM to 4PM Pacific Standard Time DO NOT return this item to the store. STOP Please call Dynacraft for assistance. Please have the following information available when you call: Model Number: (sample: 8802-33) Production Date: (sample: 03.03.2015)