Dynacraft 24V TRAIL RACER Owner's Manual

Hide thumbs

page of 32

/ 32
Bookmarks

Quick Links

Download this manual

OWNER'S MANUAL

24V TRAIL RACER

this manual contains important safety

maintenance information

first ride or allowing your child to ride your new electric

ride

on toy

keep the manual handy for future reference

DO NOT RETURN THIS ITEM TO THE STORE

CONTACT DYNACRAFT CUSTOMER SERVICE FOR ASSISTANCE

FOR AGES 3+

MAXIMUM WEIGHT: TOTAL 130 lb (59 kg), 65 lb (29.5 kg) per seat

NOTE: Illustrations in this Manual are for reference purposes only and may not reﬂect the

exact appearance of the actual product. Speciﬁcations are subject to change without notice.

read the manual before taking your

dynacraftwheels.com/contact

or 1-800-551-0032

performance and

Summary of Contents for Dynacraft 24V TRAIL RACER

Page 1 DO NOT RETURN THIS ITEM TO THE STORE CONTACT DYNACRAFT CUSTOMER SERVICE FOR ASSISTANCE dynacraftwheels.com/contact or 1-800-551-0032 FOR AGES 3+ MAXIMUM WEIGHT: TOTAL 130 lb (59 kg), 65 lb (29.5 kg) per seat NOTE: Illustrations in this Manual are for reference purposes only and may not reﬂect the...
Page 2 TABLE OF CONTENTS A Introduction, Safety and Warnings B Before You Begin Assembly C Parts Diagram D Assembly E How to Use Your Ride-On Toy F Detailed Maintenance and Repair G Troubleshooting Guide H Limited Warranty SPECIFICATIONS SUITABLE AGE CAPACITY Up to 130 lb (59 kg) MAX SPEED Low 2 5 MPH / High 5 0 MPH...
Page 3 INTRODUCTION, SAFETY AND WARNINGS ABOUT THIS MANUAL: This Manual was written to help you and your child get the most performance, comfort, enjoyment and safety when riding your new electric ride-on toy. It is important for you to understand your new electric ride-on toy.
Page 4 RIDER USE AND REQUIRED PARENTAL SUPERVISION RIDERS MUST NOT EXCEED THE WEIGHT LIMIT OF 130 LB (59 KG) AND MUST BE OVER 3 YEARS OLD. NEVER ALLOW MORE THAN 2 CHILDREN TO RIDE THE RIDE-ON TOY SIMULTANEOUSLY. The age grade for the electric ride-on toy is for 3 years and older. Just because your child is within the age and weight limitations speciﬁed for the electric ride- on toy, does not mean that his/her size is appropriate to ﬁt or maintain control of the electric ride-on toy, or that he/she is capable of safely operating the electric...
Page 5 SAFE RIDING PRACTICES AND WARNINGS • Check and obey all local laws or regulations which may be in effect in the locations where the electric ride-on toy may be used. • Always wear appropriate clothing and shoes. • Observe the age and weight limitations on the cover of this manual. •...
Page 6 • Do not allow hands, feet, hair, body parts, clothing, or similar articles to come in contact with wheels or other moving parts. • Before each cycle of operation, you must perform the preoperation checks speciﬁed in this manual or by the manufacturer, including: –...
Page 7 BEFORE YOU BEGIN ASSEMBLY NOTE: Remove all packing and items from the display box. Make sure that the power switch is turned "OFF" before assembling the electric ride-on toy. ESTIMATED ASSEMBLY TIME Because this ride-on toy is heavy and large, we strongly suggest two people to complete assembly.
Page 8 PARTS DIAGRAM Tools Required Phillips Screwdriver (not included) Socket Wrench (included) Needle-nose Pliers (not included) 1 Plastic Body Assembly x1 15 Seat Back x1 2 M6 Lock Nut x2 16 Seat Bottom x1 3 Ø6 Washer x2 17 4x16 mm Round Head Screw x10 4 M6x16 Machine Screw x2 18 Front Rack Support x2 5 Front Wheel x2...
Page 9 ASSEMBLY Your new ride-on toy requires adult assembly. Because your new ride-on toy is heavy and large, we strongly suggest using two people to ﬁnish assembly. Set aside around 60 minutes for assembly. Identify all parts before assembly and save all packaging material until assembly is completed to ensure that no parts are discarded.
Page 10 2. FRONT WHEEL ASSEMBLY Front Wheel • Remove all parts from front axle. Axle Cap Front Axle • Find a front wheel labeled "FRONT", slide Lock Nut the wheel onto the axle. • Install a Ø12 washer and M10 locknut, then tighten it with the 17 mm socket wrench.
Page 11 4. REAR WHEEL ASSEMBLY • Find a rear wheel labeled "REAR", slide Front Wheel the wheel onto the rear axle and make it Front Axle Lock Nut match up with the gear box. Axle Cap • Insert a Ø12 washer onto the axle. •...
Page 12 5. STEERING WHEEL ASSEMBLY M5 Locknut • Gently turn the ride-on toy body upright. • Remove the M5x35 machine screw and M5 locknut from the steering wheel. Steering • Insert the steering wheel onto the end of Column M5x35 Machine the steering column, line up the hole in the Screw steering wheel and the hole in the steering...
Page 13 7. TOP RACK ASSEMBLY • Find the top rack and its cross arm. • The cross arm is marked with “F” and “R” on its two ends. Find the corresponding “F” and “R” markings on the top rack and 4x16 Round Head Screw ﬁt the cross arm to the corresponding spot as shown in the diagram.
Page 14 9. RACK REAR SUPPORTS Rear Rack Support ASSEMBLY • Find one Rear Support marked with an “R2” and remove the M5x30 machine screw and M5 locknut from it. • Attach the support to the corresponding U shaped support also marked with an “R2”.
Page 15 11. POWER SUPPLY CONNECTION Battery NOTE: The battery is disconnected for shipment to prevent the battery from draining. • Securely plug the battery connector into the wire connector. Wire Battery Connector Connector 12 SEAT INSTALLATION • Find Seat Bottom and Seat Back, locate Seat Back and insert the Seat Back into the Seat Bottom as shown.
Page 16 BATTERY CHARGING IMPORTANT! Before ﬁrst time use, charge the battery for at least 18 hours. Charge the battery for at least 12 hours after each use of the ride-on toy. Never charge the battery longer than 30 hours. Overcharging or undercharging the battery may shorten battery life and decrease ride-on toy running time.
Page 17 • Do not charge the battery on a surface (such as a kitchen counter top) which could be damaged by the acid contained inside the battery. Take precautions to protect the surface on which you charge your battery. • Use only an original charger (AC 120V 60Hz) with an output of DC 24V (1A) to charge your ride-on toy battery.
Page 18 HOW TO USE YOUR RIDE-ON TOY Audio Input Jack (Audio Input Cable Included) Foot Pedal Sound Buttons Forward/Reverse Shift Lever Power Switch POWER SWITCH • Turn the ride-on toy on or off. FOOT PEDAL • To move the car, press the foot pedal down. •...
Page 19 Audio Input Cable (Included) Audio Input Jack Audio Input Jack Use the Audio input cable (Included) to connect your MP3 player or other compatible audio device with this ride-on toy to listen to and enjoy music. 1. Plug one end of the audio input cable (Included) into the audio input jack on the ride-on toy as shown.
Page 20 IMPORTANT • Always stop ride-on toy when changing the direction to avoid damage to the gears and motor. • This ride-on toy has an adjustable seat belt; instruct children on how to fasten the seat belt before using. • Do not let any child touch the wheels or be near them when the ride-on toy is moving.
Page 21 DETAILED MAINTENANCE AND REPAIR WARNING: Disconnect power supply before conducting any maintenance procedures. Phillips Screwdriver 17 mm Socket Wrench TOOLS REQUIRED: (included) (not included) Flat head Screwdriver Needle-Nose Pliers (not included) (not included) HOW TO REPLACE FRONT WHEEL 1. Remove the axle cap by sliding a ﬂat head screwdriver along the edge of the cap and carefully prying the cap open.
Page 22 HOW TO REPLACE REAR WHEEL AND GEAR BOX 1. Remove the axle cap by sliding a ﬂat head screwdriver along the edge of the cap and carefully prying the cap open. 2. Use needle nose pliers to remove the split pin in the hole of the rear axle end. 3.
Page 23 HOW TO REPLACE THE FOOT PEDAL 1. Use a ﬂat head screwdriver to gently pry the LEFT side of foot pedal. 2. Gently remove the foot pedal. 3. Disconnect the old foot pedal from the pedal switch socket. 4. Replace the foot pedal with a new one. Connect the new pedal switch to the pedal switch socket, making sure that they are snugly connected in the correct position (see Figure 3).
Page 24 HOW TO REPLACE FORWARD-REVERSE SHIFT LEVER 1. Unscrew the four screws on the seat and remove the seat. 2. Unscrew four 4x12 round head screws as shown to remove the Forward-Reverse Shifter Assembly from the ride-on toy body (diagram A). 3.
Page 25 BATTERY CARE AND DISPOSAL Do not store the battery in temperatures above 75° F (23.5° C) or below 32° F (0°C). THIS PRODUCT CONTAINS SEALED LEAD ACID BATTERIES WHICH MUST BE RECYCLED IN ACCORDANCE TO YOUR LOCAL AND STATE LAWS PLEASE CAREFULLY READ AND UNDERSTAND THE FOLLOWING DISPOSAL INSTRUCTIONS: DISPOSAL: This product contains sealed lead acid batteries which must be...
Page 26 MAINTAINING YOUR RIDE-ON TOY Occasionally use a lightweight oil to lubricate moving parts such as wheels and the steering linkages. Park the ride-on toy indoors or cover it with a tarp to protect it from wet weather. Keep the ride-on toy away from sources of heat, such as stoves and heaters. Plastic parts may melt.
Page 27 TROUBLE SHOOTING GUIDE Problem Possible Cause Solution Ride-on toy Undercharged Charge the battery. A new battery should have does not run battery been charged for at least 18 hours before using the ride-on toy for the ﬁrst time. After ﬁrst-time use, recharge the battery for at least 12 hours after each use.
Page 28 Problem Possible Cause Solution Ride-on toy Loose wires or Check all wires and connectors. Make sure the was running connectors battery connector is tightly plugged into the wire but suddenly connector, and that there are no loose wires stopped around the motor. Tripped thermal fuse The thermal fuse may “trip”...
Page 29 Problem Possible Cause Solution Ride-on toy runs Undercharged battery Charge the battery. A new battery should have sluggishly been charged for at least 18 hours before using the ride-on toy for the ﬁrst time. After ﬁrst-time use, recharge the battery for at least 12 hours after each use.
Page 30 UPGRADE YOUR WARRANTY WITH PRODUCT REGISTRATION Free warranty upgrade with online registration at dynacraftwheels.com/register. We respect your privacy. Any information collected by Dynacraft Wheels will never be shared with any other company or organization. See Dynacraft's privacy policy for further information: dynacraftwheels.com/dynacraft-privacy-policy.
Page 31 This Warranty is not transferable to anyone else and is the only warranty for your Dynacraft product, to the extent permitted by law No other express or implied warranty is given, and except to the extent prohibited by applicable law, any implied warranty of merchantability or ﬁtness for a particular purpose on this product is hereby disclaimed...
Page 32 DO NOT RETURN THIS ITEM TO THE STORE CONTACT DYNACRAFT CUSTOMER SERVICE FOR ASSISTANCE dynacraftwheels.com/contact or 1-800-551-0032 Please have the following information available: Model Number Example: 8000-00 Production Date Example: MM.DD.YYYY Serial Number Example: DXXXX00000000 This information is provided on a white sticker located on your unit and is required to help us handle your request.

Dynacraft 24V TRAIL RACER Owner's Manual

Quick Links

Related Manuals for Dynacraft 24V TRAIL RACER

Summary of Contents for Dynacraft 24V TRAIL RACER