Download
Share
Print this page
Dynacraft 6V SUPER COUPE Owner's Manual
  1. Manuals
  2. Brands
  3. Dynacraft Manuals
  4. Motorized Toy Car
  5. 6V SUPER COUPE
  6. Owner's manual
Dynacraft 6V SUPER COUPE Owner's Manual

Dynacraft 6V SUPER COUPE Owner's Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
OWNER'S MANUAL
6V SUPER COUPE
this manual contains important safety
maintenance information
first ride or allowing your child to ride your new electric
-
.
ride
on toy
keep the manual handy for future reference
DO NOT RETURN THIS ITEM TO THE STORE
CONTACT DYNACRAFT CUSTOMER SERVICE FOR ASSISTANCE
FOR AGES 3+
MAXIMUM WEIGHT: 65 lb (29.5 kg)
NOTE: Illustrations in this Manual are for reference purposes only and may not reflect the
exact appearance of the actual product. Specifications are subject to change without notice.
.
read the manual before taking your
dynacraftwheels.com/contact
or 1-800-551-0032 9
,
performance and
– 5
ET
AM
PM
.

Advertisement

loading

Related Manuals for Dynacraft 6V SUPER COUPE

Summary of Contents for Dynacraft 6V SUPER COUPE

  • Page 1 DO NOT RETURN THIS ITEM TO THE STORE CONTACT DYNACRAFT CUSTOMER SERVICE FOR ASSISTANCE dynacraftwheels.com/contact or 1-800-551-0032 9 – 5 FOR AGES 3+ MAXIMUM WEIGHT: 65 lb (29.5 kg)

  • Page 2: Table Of Contents

    TABLE OF CONTENTS A Introduction, Safety and Warnings B Before You Begin Assembly C Parts Diagram D Assembly E How to Use Your Ride-On Toy F Detailed Maintenance and Repair G Troubleshooting Guide H Limited Warranty SPECIFICATIONS SUITABLE AGE CAPACITY Up to 65 lb (29 5 kg) SPEED 2 5 MPH...

  • Page 3: A Introduction, Safety And Warnings

    INTRODUCTION, SAFETY AND WARNINGS ABOUT THIS MANUAL: This Manual was written to help you and your child get the most performance, comfort, enjoyment and safety when riding your new electric ride-on toy. It is important for you to understand your new electric ride-on toy.
  • Page 4 RIDER USE AND REQUIRED PARENTAL SUPERVISION RIDERS MUST NOT EXCEED THE WEIGHT LIMIT OF 65 LB (29.5 KG) AND MUST BE OVER 3 YEARS OLD. NEVER ALLOW MORE THAN 1 CHILD TO RIDE THE RIDE-ON TOY SIMULTANEOUSLY. The age grade for the electric ride-on toy is for 3 years and older. Just because your child is within the age and weight limitations specified for the electric ride- on toy, does not mean that his/her size is appropriate to fit or maintain control of the electric ride-on toy, or that he/she is capable of safely operating the electric...
  • Page 5 • Do not ride on surfaces that could be damaged, including carpet and certain types of vinyl or laminate flooring. Dynacraft will not be responsible for damage to such flooring. You should refer to the use and care instructions provided by the manufacturer of your particular flooring product.
  • Page 6 • Do not to allow hands, feet, hair, body parts, clothing, or similar articles to come in contact with wheels or other moving parts. • Before each cycle of operation, you must perform the preoperation checks specified in this manual or by the manufacturer, including: –...

  • Page 7: B Before You Begin Assembly

    BEFORE YOU BEGIN ASSEMBLY Remove all packing and items from the display box. Make sure that the power switch is turned “OFF” before assembling the electric ride-on toy. ESTIMATED ASSEMBLY TIME You should allow approximately 40 minutes for assembly, not including initial charging time.

  • Page 8: C Parts Diagram

    PARTS DIAGRAM Tools Required Screwdriver (not included) Pliers (not included) Socket Wrench (included) Socket Wrench Plastic Body Assembly x1 15 Motor Hood x1 Hood x1 16 Gearbox & Motor x1 Rear Axle x1 17 Driving Wheel x1 Ø12 Washer x8 18 Front Wheel &...

  • Page 9: D Assembly

    ASSEMBLY Your new ride-on toy requires adult assembly. Please set aside around 40 minutes for assembly. Please identify all parts before assembly and save all packaging material until assembly is completed to ensure that no parts are discarded. TOOLS REQUIRED: Phillips Screwdriver Needle-nose pliers (not included)
  • Page 10 2. FRONT WHEEL ASSEMBLY Ø12 Washer Ø12 Washer Bushing Axle • Remove all parts from the front axle. • Fit a Ø12 washer onto the axle. • Fit a bushing onto the axle. • Slide the wheel onto the axle, fitting the bushing inside the wheel.
  • Page 11 IMPORTANT! CHECK WHEEL GAP After assembling any wheel onto the axles, make sure to check the gap between the screw thread and the outside of the wheel (refer to the adjacent diagram). If the gap is too big, add two or three washers on the axle to the inside of the wheel.
  • Page 12 6. STEERING WHEEL ASSEMBLY Steering Wheel • Turn the ride-on toy body upright. • Remove the M5x40 machine screw and M5x40 M5 locknut from the steering wheel with a Machine M5 Locknut screwdriver. Screw • Insert the steering wheel onto the end of the steering column, lining up the hole in the steering wheel and the hole in steering column.
  • Page 13 8. WINDSHIELD ASSEMBLY • Fit the tabs on the windshield into to the 4x12 Round slots located at the front of the ride-on toy Head Screw and press down to secure. • Insert four 4x12 round head screws as shown, and tighten with a screwdriver. 9.
  • Page 14 12. POWER SUPPLY CONNECTION NOTE: The battery is disconnected for shipment to prevent the battery from draining. • Plug A connector into B Connector. (They are same color to assure correct connection.) Motor • Plug C connector into D connector. (They are same color to assure correct Battery connection.)
  • Page 15 BATTERY CHARGING IMPORTANT! Before first time use, charge the battery for at least 18 hours. Charge the battery for at least 12 hours after each use of the ride-on toy. Never charge the battery longer than 30 hours. Overcharging or undercharging the battery may shorten battery life and decrease ride-on toy running time.
  • Page 16 ride-on toy. Battery acid is very corrosive and can cause severe damage to surfaces it contacts. • Do not charge the battery on a surface (such as a kitchen counter top) which could be damaged by the acid contained inside the battery. Take precautions to protect the surface on which you charge your battery.

  • Page 17: E How To Use Your Ride-On Toy

    HOW TO USE YOUR RIDE-ON TOY Sound Button Forward Stop Reverse Audio Input Jack Power Switch Foot Pedal POWER SWITCH Turn the ride-on toy on and off. FOOT PEDAL To move the ride-on toy, press the foot pedal down. To stop, take your foot off the foot pedal. FORWARD/STOP/REVERSE To move the ride-on toy forward, shift the lever to “Forward”...
  • Page 18 3. Adjust your audio device or MP3 player volume to low level and turn the power switch on your ride-on toy to the “ON” position. 4. Then adjust the volume to increase or decrease its sound level as desired. Audio Input Cable (Included) Audio Input Jack NOTE: MP3 player or audio device not included.
  • Page 19 SAFETY PRECAUTIONS • The child must have adult supervision at all times. • Do not ride on the road, footpaths, near pools, or bodies of water. • Do not allow children under the recommended age to ride the ride-on toy; please refer to the age grading.

  • Page 20: F Detailed Maintenance And Repair

    DETAILED MAINTENANCE AND REPAIR WARNING: Turn the power “OFF” before conducting any maintenance procedures. TOOLS REQUIRED: Flat head Screwdriver 17 mm Socket Wrench (not included) (included) Phillips Screwdriver (not included) HOW TO REPLACE FRONT WHEELS AND REAR LEFT WHEEL Ø12 Washer Ø12 Washer Bushing Axle...
  • Page 21 HOW TO REPLACE THE DRIVING WHEEL AND GEAR BOX Gear Driving Wheel Locknut Ø12 Axle Washer 1. Remove the axle cap with a flat head screwdriver. 2. Remove the M10 locknut with a 17mm socket wrench. 3. Remove the Ø12 washer. 4.
  • Page 22 HOW TO REPLACE THE POWER SWITCH Power Switch Power Switch Socket Power Switch 1. Remove the power switch with a flat head screwdriver (not included). 2. Unplug the power switch from the power switch socket as shown. 3. Plug the new power switch into the power switch socket and then push the new power switch into place until you hear it click into place.
  • Page 23 HOW TO REPLACE THE FOOT PEDAL Pedal Switch Socket 1. Use a flat head screwdriver to gently pry the LEFT side of foot pedal. 2. Gently remove the foot pedal. 3. Disconnect the old foot pedal from the pedal switch socket. 4.
  • Page 24 BATTERY CARE AND DISPOSAL Do not store the battery in temperatures above 75° F (23.5° C) or below 32° F (0°C). THIS PRODUCT CONTAINS SEALED LEAD ACID BATTERIES WHICH MUST BE RECYCLED IN ACCORDANCE TO YOUR LOCAL AND STATE LAWS PLEASE CAREFULLY READ AND UNDERSTAND THE FOLLOWING DISPOSAL INSTRUCTIONS: DISPOSAL: This product contains sealed lead acid batteries which must be...
  • Page 25 MAINTAINING YOUR RIDE-ON TOY Occasionally use a lightweight oil to lubricate moving parts such as wheels and the steering linkages. Park the ride-on toy indoors or cover it with a tarp to protect it from wet weather. Keep the ride-on toy away from sources of heat, such as stoves and heaters. Plastic parts may melt.

  • Page 26: G Troubleshooting Guide

    TROUBLESHOOTING GUIDE Problem Possible Cause Solution Ride-on toy Undercharged Charge the battery. A new battery should have does not run battery been charged for at least 18 hours before using the ride-on toy for the first time. After first-time use, recharge the battery for at least 12 hours after each use.
  • Page 27 Problem Possible Cause Solution Ride-on toy Loose wires or Check all wires and connectors. Make sure the was running connectors battery connector is tightly plugged into the control but suddenly module connector, and that there are no loose stopped wires around the motor. Tripped fuse The fuse may “trip”...
  • Page 28 Problem Possible Cause Solution Ride-on toy Undercharged Charge the battery. A new battery should have runs sluggishly battery been charged for at least 18 hours before using the ride-on toy for the first time. After first-time use, recharge the battery for at least 12 hours after each use.
  • Page 29 Problem Possible Cause Solution Charger gets It is normal for No action required. warm during some chargers to If your charger does not get warm during use, it get warm during does not mean that it is not working properly. use and is not reason for concern Some chargers...

  • Page 30: H Limited Warranty

    UPGRADE YOUR WARRANTY WITH PRODUCT REGISTRATION Free warranty upgrade with online registration at dynacraftwheels.com/register. We respect your privacy. Any information collected by Dynacraft Wheels will never be shared with any other company or organization. See Dynacraft's privacy policy for further information: dynacraftwheels.com/dynacraft-privacy-policy.
  • Page 31 This Warranty is not transferable to anyone else and is the only warranty for your Dynacraft product, to the extent permitted by law No other express or implied warranty is given, and except to the extent prohibited by applicable law, any implied...
  • Page 32 DO NOT RETURN THIS ITEM TO THE STORE CONTACT DYNACRAFT CUSTOMER SERVICE FOR ASSISTANCE dynacraftwheels.com/contact or 1-800-551-0032 9 – 5 Please have the following information available: Model Number Example: 8000-00 Production Date Example: MM.DD.YYYY Serial Number Example: DXXXX00000000 This information can be found on a white sticker in the battery compartment or under your unit, and is required to help us handle your request effectively.