Drift Pro 13 Button Wireless Remote
Adjustment Buttons
Hold the button to move the adjustable bed to the desired
position.
•
Neck Up/Down: Raises and lowers the neck section
of the adjustable bed.
•
Head Up/Down: Raises and lowers the head section
of the adjustable bed.
•
Leg Up/Down: Raises and lowers the leg section of
the adjustable bed.
Remote Button Illumination
Any button press will turn on illumination for 10 seconds.
Remote One-touch Positions
Press the following buttons once to initiate the command.
To cancel, press any other button.
•
ANTI-SNORE: Raises the head to promote easier
breathing.
•
ZG (Zero Gravity): Raises the head to promote easier
breathing. Elevates legs to promote blood circulation
which may help with stress and fatigue.
•
FLAT: Flattens the adjustable bed.
Storing a Memory Position
1. Use the Adjustment Buttons to achieve the desired
position.
2. Press and hold the desired Memory button (M1 / M2)
until you hear a BEEP sound from the Control Box.
3. Memory Position programming is complete.
Recall a Memory Position
Press the desired Memory button (M1/M2) once to initiate
the command. To cancel, press any other button.
Massage Buttons
Press the following buttons once to initiate the command.
Automatic shut-off after 30 minutes.
•
Back/Leg Massage:
◦
Press once for low intensity.
◦
Press again for medium intensity.
◦
Press again for high intensity.
◦
Press again to stop.
•
STOP: Press to stop the massage.
Underbed Light
Press the Underbed Light button once to activate. Press
again to deactivate. Automatic shut-off after 10 minutes.
P a g e | 22