Basic Connections - JVC GR-AXM 270 Instructions Manual

42
EN
When
connecting the
cables, open
the jack cover.
VCR
Antenna
RF unit RF-V5U (optional)
N O TES:
● It is recommended to use the AC Power
Adapter/Charger as the power supply instead
of the battery pack.
● To monitor the picture and sound from the
camcorder without inserting a tape, set the
camcorder's Power Switch to " CAMERA" ,
then set your TV to the appropriate input
mode.
● If you have a TV or speakers that are not
specially shielded, do not place the speakers
adjacent to the TV as interference will occur
in the camcorder playback picture.
Downloaded from:
To AUDIO and VIDEO
OUT connectors
Audio and Video
cables (optional)
To AUDIO and
VIDEO IN
connectors
To AUDIO,
VIDEO and RF DC
OUT connectors
https://www.usersmanualguide.com/
PLAYBACK
There are three basic types of connections. When making
the connections, refer also to your VCR and TV
instruction manuals.
Connection To A VCR
(Editing, Dubbing and Playback)
N O TE:
Use the optional Audio and Video cables.
CO N N ECT CAMCO RDER TO VCR
As shown in the illustration at left, connect the
1
Audio and Video cables between the AUDIO and
VIDEO OUT connectors on the camcorder and
those on the VCR.
SUPPLY PO W ER
Turn on the camcorder, the VCR and the TV.
2
SELECT MO DE
Set the VCR to its AUX input mode, and set the TV
3
to its VIDEO mode.
Connection To A TV W ith A/ V Input
Connectors (Playback ONLY)
B
N O TE:
Use the optional Audio and Video cables.
CO N N ECT CAMCO RDER TO TV
As shown in the illustration at left, connect the
1
Audio and Video cables between the AUDIO and
VIDEO OUT connectors on the camcorder and
those on the TV.
SELECT MO DE
Set the TV to its VIDEO or AV mode (as specified in
2
its instructions).
Connection To A TV W ith NO A/ V Input
Connectors (Playback ONLY)
N O TE:
Use the optional RF-V5U RF unit.
* Refer to the RF-V5U instruction manual for connection
procedure.

Basic Connections

A